Easiest way to wire this circuit: Connect hi and lo beam wires to the two "common" contacts. Measure the hi beam wire connection to the outside contact in the setting for lo beam. Leave that contact open and wire the other 3 outside contacts to +12v if the lights return is ground. Good luck, Cor.
On Sat, May 11, 2019, 8:11 PM Michael Ross via EV <ev@lists.evdl.org> wrote: > I am not sure what you are trying to do and I don't want to figure it out, > but I will say you can definitely jumper the terminals and something will > happen. I used to design switches for Eaton Corp and it was common to ship > some configurations with this kind of mod. For example a DPDT can be used > to reverse a DC motor by switching the output polarity. This probably > Google-able. > > I would advocate that you carefully diagram the circuit on paper. It is > easy to get this sort of thing wrong. > > On Sat, May 11, 2019 at 8:36 PM evtlfp20 via EV <ev@lists.evdl.org> wrote: > > > on my electric motorcycle I want to use my DPDT 3 postion switch to > > have like a hi /lo beam, but both lights on "hi beam " and one on "low > > beam"setting. > > > > sw postion 1 2 3 > > 1 light / off/ 2nd light & 1st light both > > > > > > > > Can do i do this by jumpering across 1 & 3 on one side only?? > > > > _______________________________________________ > > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > > Please discuss EV drag racing at NEDRA ( > > http://groups.yahoo.com/group/NEDRA) > > > > > > -- > Michael E. Ross > (919) 585-6737 Land > (919) 901-2805 Cell and Text > (919) 576-0824 <https://www.google.com/voice/b/0?pli=1#phones> Tablet, > Google Phone and Text > > > > > < > http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail > > > Virus-free. > www.avg.com > < > http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20190511/2a695b73/attachment.html > > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > Please discuss EV drag racing at NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20190511/f97e1707/attachment.html> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
