Hello everyone, Looking for advice and maybe several options for electrifying my 1/4 scale antique park gauge miniature locomotive.
-------------- next part -------------- A non-text attachment was scrubbed... Name: image1.jpeg Type: image/jpeg Size: 40896 bytes Desc: not available URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20201021/b4ccf813/attachment.jpeg> -------------- next part -------------- These are 12? gauge locos, approx 8? long, 26? wide and weigh around 1000# fully equipped with power train, trucks (frames that hold axles and wheels). Traditionally these locos were powered with 4 cylinder gas motors and small reduction gears connected with shafts to each truck, and could pull 4-5 passenger cars with a total weight of around 6,000-8,000 pounds, at a max speed of 10 MPH. I would like to replace the gas engine with one or two, used, 5 Kw smallish 24volt, series wound forklift motors. One per truck. However, so far, haven?t been able to determine what the amp hour draw might be for these size motors, or what kind of battery pack would allow 6-8 hours operation. Anybody have any experience with these size motors? Or alternatively, any suggestions as to what might be a reasonable, DYI conversion? Thanks much, for any information, or ideas, you might be able to offer. Regards, Glenn B. Sent from my iPad _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub ARCHIVE: http://www.evdl.org/archive/index.html INFO: http://lists.evdl.org/listinfo.cgi/ev-evdl.org Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
