Hi Mads, On 4/12/2013 2:57 AM, Mads Boye wrote: > Hi again. > I fixed the issue myself. > The issue was caused by the fact that i had libopensm.so.5.0.0 and a symlink > libopensm.so.5 in /usr/lib64 > I removed them and created a symlink ln -s /usr/local/lib/libopensm.so.5.1.1 > libopensm.so.5 in /usr/lib64 and now i am able to start opensm 3.3.16. > > My system is Ubuntu 12.04 x86_64.
Your system already had an older OpenSM on it and by default, opensm is installed in /usr/local/... (lib, etc.). I suspect your library path had /usr/lib64 ahead of /usr/lib or /usr/local/lib. There are a number of ways around this. One is the way you found. Another is to configure so that the libraries go into /usr/lib64. -- Hal > Still if this is not the correct mailinglist please let me know, so i can > post the solution the right place. > > Mads Boye > HPC & VMware Administrator | Information Service Technology > > Phone: (+45) 9940 3453 | Email:[email protected] | Webhomes.ist.aau.dk/mb/ > Aalborg University | Selma Lagerløfs Vej 300 - 4.2.46 | Aalborg East | > > ________________________________________ > Fra: [email protected] [[email protected]] > på vegne af Mads Boye [[email protected]] > Sendt: 12. april 2013 08:27 > Til: [email protected] > Emne: Re: [ewg] OpenSM 3.3.16 will not start > > Sorry i forgot a thing. > This is the output i get when i try to run opensm > > mb@munchkin1:~$ sudo /usr/local/sbin/opensm > [sudo] password for mb: > ------------------------------------------------- > OpenSM 3.3.16 > Command Line Arguments: > Log File: /var/log/opensm.log > ------------------------------------------------- > /usr/local/sbin/opensm: relocation error: /usr/local/sbin/opensm: symbol > osm_log_v2, version OPENSM_1.5 not defined in file libopensm.so.5 with link > time reference > > Thank you. > > Mads Boye > HPC & VMware Administrator | Information Service Technology > > Phone: (+45) 9940 3453 | Email:[email protected] | Webhomes.ist.aau.dk/mb/ > Aalborg University | Selma Lagerløfs Vej 300 - 4.2.46 | Aalborg East | > > ________________________________________ > Fra: [email protected] [[email protected]] > på vegne af Mads Boye [[email protected]] > Sendt: 12. april 2013 08:25 > Til: [email protected] > Emne: [ewg] OpenSM 3.3.16 will not start > > Hi. > > I'm trying to configure OFED in our cluster, and therefore have been > installing openSM from source. > In the INSTALL it says to start openSM from /usr/local/sbin/opensm and if > this fails send an email with /var/log/opensm.log so i hope this is the right > mailing list, otherwise I'm sorry and hope that you can point me to the > proper list. > > Our worker nodes PXE boots from an image on a local administration machine. > OpenSM has been compiled and installed into this image directly with no > errors durring ./configure , make , or make install. > > I've rebooted the node. > > OFED is also installed directly in the image without any installation errors. > openibd starts correctly at boot. > > Hope that you are able to help me. > > Please let me know if you need further information. > > Best Regards > > Mads Boye. > _______________________________________________ > ewg mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg > _______________________________________________ > ewg mailing list > [email protected] > http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg > _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
