Hi Mads, On 4/12/2013 10:09 AM, Mads Boye wrote: > Hi Hal. > Yes, maybe i understood it incorrectly, but doesn't all nodes need the OpenSM > running, in order for working IB?
To clarify, a subnet needs to have at least 1 SM running. It's best if OpenSM runs on a small number of admin nodes which are always present. -- Hal > The PXE booting is happening over an admin ethernet. > Mads Boye > HPC & VMware Administrator | Information Service Technology > > Phone: (+45) 9940 3453 | Email:[email protected] | Webhomes.ist.aau.dk/mb/ > Aalborg University | Selma Lagerløfs Vej 300 - 4.2.46 | Aalborg East | > > ________________________________________ > Fra: Hal Rosenstock [[email protected]] > Sendt: 12. april 2013 16:04 > Til: Mads Boye > Cc: [email protected] > Emne: Re: [ewg] OpenSM 3.3.16 will not start > > Hi again Mads, > > On 4/12/2013 2:25 AM, Mads Boye wrote: >> Our worker nodes PXE boots from an image on a local administration machine. >> OpenSM has been compiled and installed into this image directly >> with no errors durring ./configure , make , or make install. > > Are you saying that worker nodes run OpenSM ? > > Is the PXE booting over IB (or some other network) ? > > -- Hal > _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
