Hi Hal. Thank you for the clarification. The admin nodes must be connected to the infiniband network aswell I assume?
De bedste hilsner / Best regards, Mads Boye. > -----Original Message----- > From: Hal Rosenstock [mailto:[email protected]] > Sent: 12. april 2013 16:15 > To: Mads Boye; [email protected] > Subject: Re: SV: [ewg] OpenSM 3.3.16 will not start > > Hi Mads, > > On 4/12/2013 10:09 AM, Mads Boye wrote: > > Hi Hal. > > Yes, maybe i understood it incorrectly, but doesn't all nodes need the > OpenSM running, in order for working IB? > > To clarify, a subnet needs to have at least 1 SM running. It's best if OpenSM > runs on a small number of admin nodes which are always present. > > -- Hal > > > The PXE booting is happening over an admin ethernet. > > > Mads Boye > > HPC & VMware Administrator | Information Service Technology > > > > Phone: (+45) 9940 3453 | Email:[email protected] | > > Webhomes.ist.aau.dk/mb/ Aalborg University | Selma Lagerløfs Vej 300 - > > 4.2.46 | Aalborg East | > > > > ________________________________________ > > Fra: Hal Rosenstock [[email protected]] > > Sendt: 12. april 2013 16:04 > > Til: Mads Boye > > Cc: [email protected] > > Emne: Re: [ewg] OpenSM 3.3.16 will not start > > > > Hi again Mads, > > > > On 4/12/2013 2:25 AM, Mads Boye wrote: > >> Our worker nodes PXE boots from an image on a local administration > >> machine. OpenSM has been compiled and installed into this image directly > with no errors durring ./configure , make , or make install. > > > > Are you saying that worker nodes run OpenSM ? > > > > Is the PXE booting over IB (or some other network) ? > > > > -- Hal > > _______________________________________________ ewg mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ewg
