Why wouldn't you put a GC in the child domain? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, November 09, 2004 8:38 AM To: Exchange Discussions Subject: FW: ADC connection agreement
Little update. I am using ADC from ex2ksp3. Deploying Ex2k. Further information: This ADC agreement is between Exchange 5.5SP4/DC that resides in a child domain. The only CGs I have are in the parent domain. I have figured out that these 8 accounts would not replicate because the 'Manager field in their mailboxes has a mailbox from the parent domain. When I removed this Manager the account and mailbox replicate. I have found if I promote the Domain Controller in the child domain to a CG this resolves the issue. I have 13 remote Exchange 5.5SP4 sites (Satellite links) in their own Win2k domains. These are single Servers hosting Exchange and DC. I have done a lot of reading and understand that I can't make all these servers GCs and that it is necessary to have one GC in each domain that Ex2k is installed in? Not to mention the added Network traffic. Can this work in my present configuration. Any help or pointers much appreciated. Mort Billups Crowley Maritime Corporation -----Original Message----- From: Billups, Morton Sent: Thursday, November 04, 2004 7:39 AM To: 'Exchange Discussions' Subject: RE: ADC connection agreement Yes, many many times. Yes, lost count how many times. Yes, as stated 8022 and 8070 description below. I have made some progress. As stated below 8 of 143 mailboxes and 2 DLs would not replicate. What I have discovered is if the mailbox manager's field is modified with a mailbox from another Site replication will fail. If the DL has a member from another site replication will fail. I don't know why this is happening yet, but I feel a little closer to solving it. So that is where my focus is currently. Thanks again for your reply. PS.. If anyone wants to know how I troubleshot this I'll try to describe it. Mort Billups Crowley Maritime Corporation -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Crowley [MVP] Sent: Wednesday, November 03, 2004 9:34 PM To: Exchange Discussions Subject: RE: ADC connection agreement Have you verified that the ADC is running? Have you changed an attribute on a properly connected mailbox and watched to see if it gets reflected on the other side? Have you looked at the event log for any errors on the server on which the ADC is running? Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, November 03, 2004 4:24 AM To: Exchange Discussions Subject: RE: ADC connection agreement They are all in the default Recipient container. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Crowley [MVP] Sent: Tuesday, November 02, 2004 6:38 PM To: Exchange Discussions Subject: RE: ADC connection agreement That means that the ADC should try to replicate them. It'll skip ones that have the ADC-Global-Names attribute filled in. These mailboxes aren't in a different container, are they? Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, November 02, 2004 12:15 PM To: Exchange Discussions Subject: RE: ADC connection agreement Thanks for replying! Since my last post I tried to do that, but when viewing the raw properties of the mailbox the ADC-Global-Names attributes are not set (blank). You can only see the object ADC-Global-Names if the view is set to ALL. I have also reinstalled the ADC (ex2ksp3 flavor), but I same results. Probably related is 2 DL won't replicate to AD. A new DL will replicate just fine. Still digging! Mort Billups Crowley Maritime Corporation -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Crowley [MVP] Sent: Tuesday, November 02, 2004 1:27 PM To: Exchange Discussions Subject: RE: ADC connection agreement I see what you're trying to do. Start Exchange 5.5 Administrator in Raw Mode (admin /r). Open the raw properties of each disconnected mailbox (Shift-Enter) and remove the ADC-Global-Names attribute. The next time the ADC runs it should create a new disabled user or connect the mailbox to the corresponding AD user. Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, November 01, 2004 11:15 AM To: Exchange Discussions Subject: RE: ADC connection agreement I don't think I can do that. I don't have any E2k servers running. If I can ever figure out this problem maybe I'll get to install one? I am just tying to get these 8 Ex5.5 mailboxes synchronize with their AD accounts. I have 12 other remote Ex5.5 sites so I want to get this working correctly before proceeding. Mort Billups Crowley Maritime Corporation -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ed Crowley [MVP] Sent: Monday, November 01, 2004 1:44 PM To: Exchange Discussions Subject: RE: ADC connection agreement In ESM under the mailbox store list the mailboxes. Right-click one and select to Reconnect. Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Monday, November 01, 2004 4:20 AM To: Exchange Discussions Subject: RE: ADC connection agreement Thanks for the reply. I did remove the Exchange attributes and restarted the ADC. That didn't work unfortunately. What exactly does reconnecting a mailbox mean? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mike Lagase Sent: Friday, October 29, 2004 7:16 PM To: Exchange Discussions Subject: Re: ADC connection agreement Try removing the Exchange attributes for one user and then reconnecting that mailbox to the AD user. See if that then replicates properly. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Friday, October 29, 2004 2:19 PM Subject: ADC connection agreement > Hi, > > I have one ADC two way connection agreement setup to replicate users > and mailboxes. There are 8 users/mailboxes that won't > synchronize/replicate out of 143 users in this site. None of these > mailboxes/accounts have ADC-Global-Names or msExchADCGlobalNames. > Event gives an 8022 and 8070 error which states that LDAP modify fails > because "No Such Object' exist. I am running Ex5.5sp4 and > Win2ksp4 Native. I have upgraded ADC to Ex2k3sp1, recreated the > agreements and done a lot of swearing so far. So far I haven't been > able to duplicate this in my Lab. > > I have two other Exchange 5.5 Sites with ADCs setup. They are working > just fine. The only obvious difference to me is that the third site's > accounts are in a child AD domain. > > I would appreciate any suggestions. I poor head hurts from reading so > many KB articles and searching the Web. > > Mort Billups > Crowley Maritime Corporation > > _________________________________________________________________ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
