If there's nothing in the logs you need to go to the network level and sniff.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Evan Mann Posted At: Wednesday, September 21, 2005 1:31 PM Posted To: swynk Conversation: SMTP errors Subject: RE: SMTP errors Finally, someone else who feels my pain. I've had this since about a year now. I >THINK< it was around the time I installed SP1 for Exchange, but really cannot corrolate that for fact. If you get the message, you can resend it 5 seconds later and it should go through 99% of the time. If you look at the SMTP Connector logs, you'll see that the mail servers called properly and then the receiving server gave the unable to relay message. My only guess is the way the sending server is trying to communicate is inducing some weird information that causes it to think you are trying to relay. I have >NEVER< gotten the message when I telnet and run the SMTP commands myself. All the usual things people tell me to check have provided absolutely nothing for resolution. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Wednesday, September 21, 2005 2:29 PM To: Exchange Discussions Subject: SMTP errors Hi Since installing a SMTP connector on Exchange 2K3 SP1 I have been intermittently receiving the following error: 'You do not have permission to send to this recipient. For assistance, contact your system administrator. <JAX-MBH-01.crowley.com #5.7.1 smtp;550 5.7.1 Unable to relay for external address. These are addresses that have been working in the past. Message tracking shows a NDR created after smtp:started outbound transfer of message. Some times I can duplicate the error when I test. While other times it will work when I test it. I suspect that the problem is at my end, but don't know how to attack this problem. I have a Exchange 5.5 IMC I just tested one such address. It failed when I tested it. A telnet to the smtp server worked just fine. So I tested it again from Outlook and of coursed it worked. This is driving be crazy. Any help would be greatly appreciated. My searches haven't turned up any thing that would seem to cause this problem. Mort Billups Crowley Maritime Corporation Jacksonville, FL _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with. _________________________________________________________________ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/read/?forum=exchange To subscribe: http://e-newsletters.internet.com/discussionlists.html/ To unsubscribe send a blank email to [EMAIL PROTECTED] Exchange List admin: [EMAIL PROTECTED] To unsubscribe via postal mail, please contact us at: Jupitermedia Corp. Attn: Discussion List Management 475 Park Avenue South New York, NY 10016 Please include the email address which you have been contacted with.
