Hmm. Technet's wrong. We run 1300 all over the place (it's the Cisco
client).

Are you still receiving the need to fragment message?

--------------------------------------------------------------
Roger D. Seielstad - MTS MCSE MS-MVP
Sr. Systems Administrator
Inovis Inc.


> -----Original Message-----
> From: Warren Cundy [mailto:[EMAIL PROTECTED] 
> Sent: Friday, July 18, 2003 4:15 PM
> To: Exchange Discussions
> Subject: RE: Outlook/Exchange/VPN connectivity problem
> 
> 
> Thanks for this Roger.
> 
> However the ping still doesn't work at 1400.  Technet says 
> not to set this
> below 1400, what else can I do?
> 
> Thanks
> 
> -Warren
> 
> -----Original Message-----
> From: Roger Seielstad [mailto:[EMAIL PROTECTED] 
> Sent: Friday, July 18, 2003 10:54 AM
> To: Exchange Discussions
> Subject: RE: Outlook/Exchange/VPN connectivity problem
> 
> 
> Nope. Not DNS.
> 
> MTU size. Do a technet search on MTU (or check with your VPN 
> client vendor
> if you're not using the built in client) and find out how to 
> set the MTU to
> <1500 (we use 1400).
> 
> Outlook has a nasty habit of setting the Do Not Fragment bit on
> communications, and sends it at the existing MTU size. The 
> VPN client then
> encapulates the packet and adds to the packet size, exceeding 
> the network's
> MTU. The first hop router then generates an ICMP reply 
> basically saying the
> packet needs to be fragmented by DF flag is set (Don't Fragment Flag).
> 
> You can test it with the following command while connected via VPN.
>       ping -l 1536 -f ipaddress
> 
> 1536 is the standard Ethernet MTU. Try dropping that to 1400 
> and seeing if
> it works. I'd bet that's your culprit.
> 
> --------------------------------------------------------------
> Roger D. Seielstad - MTS MCSE MS-MVP
> Sr. Systems Administrator
> Inovis Inc.
> 
> 
> > -----Original Message-----
> > From: Warren Cundy [mailto:[EMAIL PROTECTED]
> > Sent: Friday, July 18, 2003 1:06 PM
> > To: Exchange Discussions
> > Subject: Outlook/Exchange/VPN connectivity problem
> > 
> > 
> > Hi guys,
> > 
> > A few users are having an intermittent connectivity problem
> > to Exchange
> > server over a VPN connection.  Here's what we're using: 
> > Exchange 2000 Sp3,
> > Outlook 2002 Sp2 on the clients.
> > 
> > When these users connect to our VPN, they can see/ping
> > everything, including
> > Exchange, but always have problems opening outlook.  First 
> > they have to set
> > their profile to manually control the connection and force an online
> > connection.  Even then they have to hit "retry" a few times, 
> > but it finally
> > connects, although very slowly.
> > 
> > I know DNS DNS DNS, but they can ping the Exchange server by
> > name, and I
> > even gave them entries in the HOSTS file for the local 
> (internal VPN)
> > address of the Exchange server... any thoughts here?  Its 
> > driving me crazy.
> > 
> > -W
> > 
> > _________________________________________________________________
> > List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> > Web Interface:
> > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&t
> ext_mode=&lang=english
> To unsubscribe:         mailto:[EMAIL PROTECTED]
> Exchange List admin:    [EMAIL PROTECTED]
> 
> _________________________________________________________________
> List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
> Web Interface:
> http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&t
ext_mode=&lang
=english
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Web Interface:
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang
=english
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

_________________________________________________________________
List posting FAQ:       http://www.swinc.com/resource/exch_faq.htm
Web Interface: 
http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english
To unsubscribe:         mailto:[EMAIL PROTECTED]
Exchange List admin:    [EMAIL PROTECTED]

Reply via email to