On Wed, Mar 29, 2000 at 20:55 +0200, Burkhard Zombronner wrote:
> problem is nearly solved!
>
> I tried another Symbios pci scsi controller 815 and had the same trouble as
> before, so Idid guess it may be configuration or driver problem from mandrake
> 7.0. My next try was to download mandrake 7.02 and wait what happens! The same
> trouble came on and big frustration. Then I tried a Adaptec 2940U2W out of the
> box did no changes at all to settings inside the controller bios and what
> surprise it did work right from the beginning. The next try was to build the
> symbios 895 again into my computer and to change settings to:
>
> Plextor cdrom and yamaha writer set 8bit bus and speed of 10mb and with a
> little bit of luck intstallation went smooth nearly; on doing some work I just
> had a couple of resets on the scsi-bus but no serious problems any more.
>
> Hope this solution could help you Wolfgang and some others.
Lucky you!
Changed to 8bit bus, already had 10mb speed. No luck :-(
BTW: My Dawicontrol host has a ncr53c875-E chip. So it may be
different.
As there is no reply from any other listmembers I assume that
there is nobody with an idea for a solution.
I sent a detailed description to [EMAIL PROTECTED] and a
copy to the Mandrake office. As I'm working for them I just hope
to get an answer....
wobo
--
GPG-Fingerprint: FE5A 0891 7027 8D1B 4E3F 73C1 AD9B D732 A698 82EE
For Public Key mailto [EMAIL PROTECTED] with Subject: GPG-Request
-------------------------------------------------------------------
ISDN4LINUX-FAQ -- Deutsch: http://www.wolf-b.de/i4l/i4lfaq-de.html
