This is just a wild guess at best!  I saw something similar trying to peruse
the CD on a running 7.1 system.  I was *really* exasperated by the fact that
the eject button didn't work.  Finally I got a pushpin (like you would use
for a cork board (didn't have a paper clip which has a longer reach)).

I pushed gingerly expecting the kind of resistance that I have found when
doing this on un-powered systems.  Plus I was afraid of working against a
powered up mechanism.  In my particular case I found no resistance but
rather the CD drawer light came on and the shelf came out.  Perhaps there
was an optical sensor or some sort.

So you might want to try that.  Again, you usually need to use a paper clip
that has been unbent, but that's what that little hole in the front is
actually for.  Just go easy.

Cheers,
-rick


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of [EMAIL PROTECTED]
Sent: Thursday, September 28, 2000 8:28 AM
To: [EMAIL PROTECTED]
Subject: [MandrakeForum] Install - CD won't eject for 2nd disk


Install - CD won't eject for 2nd disk
(http://forum.mandrakesoft.com/article.php3?sid=20000928082739)

Robetr Maynord writes
"I have been installing 7.1 on machines at the elementary school
where I work. I use the Mandrake Deluxe version CDs.
The problem is: on half of the machines, the first install CD
does not eject, so I am unable to insert the 2nd CD.
I have tried different CD drives (all ATAPI).  On some machines (P200) it
works.
On other machines (IBM P300) the CD won't eject.
If I use "cancel" to finish the install, the printer files aren't loaded.

Any ideas??

Robert
 "


Answer: This is a bug in 7.1 installer
- If there isn't enough RAM to switch the ramdisk,
installer will not be able to switch CD-s.
You will see it on every machine with less than 40 MB.

Solution is to choose single-CD instalation.
FYI:in 7.2 DrakX installer will automatically detect
low-RAM machines and switch to single CD instalation mode.





Keep in touch with http://mandrakeforum.com: 
Subscribe the "[EMAIL PROTECTED]" mailing list.

Reply via email to