You need a space between the double quote and the hdd
append=" hdd=ide-scsi"
Mike
------------------------------------------
Mike MacCana Support Consultant
C Y B E R S O U R C E
Level 9, 140 Queen St Melbourne 3000
Ph : +61 3 9642 5997 Fax: +61 3 9642 5998
On Tue, 20 Feb 2001, Klar Brian D Contr MSG SICN wrote:
> I missed that in my posting. I do have append="hdd=ide-scsi"
> This is what makes it odd for me to understand why it doesn't show up!
>
> Brian
>
> -----Original Message-----
> From: Jason Straight [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, February 20, 2001 12:03 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [expert] mandrake 8.0b and cdrw
>
>
> On Tuesday 20 February 2001 10:02, you wrote:
> > Ok, this is my first time with scsi and linux. I have 7.2 and now 8.0
> > installed on my
> > machine which dual boots with 98. Mandrake 8.0 beta sets up the cdrw
> (Sony)
> > after installation. The cdrw is found perfectly. Installation was great
> for
> > 8.0 (mostly)
> > but cdrecord --scanbus doesn't show it. My drive layout is as follows:
> > ide0 -- Master 6.4G (all Win98) Slave zip 100
> > ide1 -- Master 6.4G (Mdk 7.2) Slave Sony CDRW
> >
> > These are addressed as hda, hdb, hdc, hdd accordingly
> > My SCSI devices are sda 4.3G, and sdb 4.3G running off an Adaptec 2930 and
> > one
> > cable.
> >
> > cdrecord --scanbus shows
> > scsibus0:
> > 0,0,0 0) *
> > 0,1,0 1) *
> > 0,2,0 2) *
> > 0,3,0 3) *
> > 0,4,0 4) *
> > 0,5,0 5) 'WDIGTL ' 'ENTERPRISE ' '1.91' Disk
> > 0,6,0 6) 'WDIGTL ' 'ENTERPRISE ' '1.91' Disk
> > 0,7,0 7) *
> > scsibus1:
> > 1,0,0 100) 'IOMEGA ' 'ZIP 100 ' '12.A' Removable Disk
> > 1,1,0 101) *
> > 1,2,0 102) *
> > 1,3,0 103) *
> > 1,4,0 104) *
> > 1,5,0 105) *
> > 1,6,0 106) *
> > 1,7,0 107) *
> >
> > Question, How do I get the cdrw to join this group of scsi devices so I
> can
> > burn
> > a CD.
> >
> > Here is my dev listings
> > [root /dev] ls -al hdd
> > brw-rw---- 1 root disk 22, 64 Jan 17 06:17 hdd
> > [root /dev] ls -al cdrom
> > lrwxrwxrwx 1 brian cdwriter 4 Feb 18 21:41 cdrom -> scd0
> > [root /dev] ls -al scd0
> > brw-rw---- 1 brian cdwriter 11, 0 Jan 17 06:18 scd0
> >
> > lsmod (condensed) is:
> > [root /dev] lsmod
> > Module Size Used by
> > sg 16064 0 (autoclean)
> > aic7xxx 137440 2
> >
> > Any help appreciated
> >
> > Brian D. Klar - CVE
> > OTS
> > WPAFB
> > (937) 656-2861
> > (937) 973-3125 (pager)
>
> give the kernel param at boot time "hdd=ide-scsi"
>
> Here is my lilo entry
>
> image=/boot/vmlinuz-2.4.1
> label=2.4
> root=/dev/hda5
> append=" ide0=autotune ide1=autotune hdb=ide-scsi hdc=ide-scsi"
> read-only
>
> You just need to add the stuff to the append= line.
>
>
>
>
> --
> Jason Straight
>
>
