On Mon, Apr 15, 2002 at 04:29:22PM +0200, Javier Martinez Villacampa wrote:
> Hi everybody,
>
> I have this monitor LG FLATRON 795FT+, and is able to have a resolution
> of 1024x768 at 100 Hz.
>
> In fact under Xfree86 3.3.6 it works in that way.
>
> But under Xfree86 4.2.0 it only works at 85 Hz.
It seems X4 defaults to 85 Hz max for all modes and the default config
contains no modelines for default modes. If you want different timing
you can try copying modelines from XF86config to XF86Config-4 or writing
your own.
>
> I amn using a MDK 8.2, and this monitor is not recogniced by the X
> wizard, so i have to put it as a generic monitor with similar refresh
> times.
Does it appear in the list of monitors? If so, you should select it
there. Otherwise you can set the capabilities in /etc/X11/XF86Configi-4. It
should include de cumentation or you can have a look at man XF86Config.
>
> My graphics card is a TNT2 M64 (PixelView All-in-ComboTV 128) with 32
> MBs, so this is not the problem. The problem is in the program that
> configures the refresh.
Do both your card and monitor support DDC? If so, the monitor should be
detected but often it is not.
HTH
--
Michal Suchanek
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
