Here are the results of this example: [root@mrroboto root]# mount -a [root@mrroboto root]# mount /mnt/zip mount: /dev/hdb4 is not a valid block device
and it is the same if i use sdb4 This is the slave on the Primary. hda = 40 hd hdb = zip 100 hdc = sony cdrw hdd = toshiba cdrom sda1 = 9.1G Seagate Oddly enough sda1 although set to, will not mount at boot. It will mount fine once booted and all. The SCSI card is Adaptec 2940. mobo = Tyan 2390b Primary is using ATA100 Brian D. Klar - CVE OTS WPAFB -----Original Message----- From: Ronald J. Hall [mailto:[EMAIL PROTECTED]] Sent: Friday, October 11, 2002 2:21 PM To: [EMAIL PROTECTED] Subject: Re: [expert] Iomega Zip not detected under v9.0 On Friday 11 October 2002 01:59 pm, you wrote: > If this is a clean install of 9.0, not an upgrade, > edit your /etc/fstab. > Remove the existing entry, if any, for your zip and replace it with > this: > > /dev/sda4 /mnt/zip auto user 0 0 > > Use mount -a or reboot your system. > > Put a disk in the drive, issue mount /mnt/zip and you should be able to > access it. > > > Charles Here is my /etc/fstab entry (works fine): /dev/hdc4 /mnt/zip vfat nosuid,user,noauto,nodev 0 0 Just another example. BTW, Charles - love Hitchhikers - bet the Heart of Golds' Improbability Drive is powered by Linux! :-) -- /\ Dark< >Lord \/
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
