I was using the same board until a couple of days ago, it now has windows. Well, I was using my IBM HD on the ata100 HPT 370 channels and I had around 35 Mb/sec txr rate using hdparm.
-Fridhar
J. Grant wrote:
Hi,
I've got one Abit KT7 RAID MB system running stock mdk9 kernel. Its running, however, the hd speed is slow because it only works with no dma etc. I am using the correct ata100 cables with only a single drive on each channel.
Has anyone else experienced this with this motherboard using the raid channels?
Cheers
JG
Journalled Block Device driver loaded
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide2: reset: success
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide2: reset: success
------------------------------------------------------------------------
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
