Sridhar wrote:
J. Grant wrote:
Hi,
I've got one Abit KT7 RAID MB system running stock mdk9 kernel. Its
running, however, the hd speed is slow because it only works with no
dma etc. I am using the correct ata100 cables with only a single drive
on each channel.
Has anyone else experienced this with this motherboard using the raid
channels?
Cheers
JG
Journalled Block Device driver loaded
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide2: reset: success
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
hde: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hde: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide2: reset: success
Jus wondering, have up updated ur bios.
Just wondering, are you using WD harddrives?
drjung
--
J. Craig Woods
UNIX Network/System Administration
http://www.trismegistus.net/resume.html
Character is built upon the debris of despair --Emerson
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
