Gas pouring out of the float bowl overflow tubes would be indicative of a stuck 
float on that carb.

There are 4 components to the electrical system that make the 494 run... The 
Coil, The CDI box, The Stator and the Trigger.  The Coil and CDI are external 
to the engine.  The Stator is contained within the flywheel and the trigger is 
mounted under the plastic cover on top of the flywheel (the flywheel is on the 
end of the engine with the recoil starter and can be accessed by removing the 
recoil starter.  The connections between these components are 'fool proof' as 
the connectors can only go together correctly.  The trigger is easiest to 
check, pop the plastic cover and see if it is there.  All the other components 
can have electrical defects that can cause a failure to fire.  Not being 
electrically gifted or knowledgeable, the only thing I know to do is to throw 
new electrical part at it until it runs.

All the electrical parts can be obtained from Tony Murphy the aftermarket Rotax 
distributor...who's number I don't have at work.....:(


Chuck McAbee
SEDIV #16

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of
[EMAIL PROTECTED]
Sent: Friday, May 26, 2006 23:33
To: [email protected]
Subject: RE: [F500] RE: need carb help


have a rotax 494 trying to get running for the first time.  I have gas pooring 
out of my 2 lines that come off the sides of my # 1 carborator.  May be the 
over flow hoses they look like they come from the bowls of the carbs.  how do 
you fix this..Rory the new beeee

__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp
_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***

-----------------------------------------
This email transmission and any accompanying attachments may
contain CSX privileged and confidential information intended only
for the use of the intended addressee.  Any dissemination,
distribution, copying or action taken in reliance on the contents
of this email by anyone other than the intended recipient is
strictly prohibited.  If you have received this email in error
please immediately delete it and  notify sender at the above CSX
email address.  Sender and CSX accept no liability for any damage
caused directly or indirectly by receipt of this email.


_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***

Reply via email to