Tony,
Usually, those remote cables are actuated by a lever at the end of the
cable. Just 'flip' the lever all the way and the choke should be
activated. At the carb end, you want the plunger to be pulled up approx
3/8 inch when the choke is activated. When the choke lever is released,
the spring in the choke will make sure the plunger seats at the bottom.
When I fire my engine, I just choke one carb. The engine normally fires
right away and it is then necessary to release the choke almost
immediately. If you choke both carbs, you'll have to play with how much
you move the lever so you don't over-choke the engine.
-Jeff B.
Anthony Jagodnik wrote:
I am using remote cable choke linkage for the first time on my new
Mikuni VM38s. How do you adjust the linkage to be sure the plunger
goes all the way down, yet still lifts enough? I hope to fire it up
for the first time today.
Regards,
Tony Jagodnik
NER SoloII FM 6 '87 KBS Mk3 F500
[EMAIL PROTECTED]
________________________________
FormulaCar Magazine - A Proud Supporter of Formula 500
The Official Publication of Junior Formula Car Racing
Subscribe Today! www.formulacarmag.com or 519-624-2003
_________________________________
_______________________________________________
F500 mailing list - [email protected]
To unsubscribe or change options please visit:
http://f500.org/mailman/listinfo/f500
*** Please, DO NOT send unsubscribe requests to the mailing list! ***
