Hi Mykle, Thanks for sharing your normalizing gains. As the author of gnoise and pink_noise, I am happy to add two functions to noises.lib such as
pink_noise_m = pink_noise * 12.5; // Equalizes loudness to that of no.noise (thanks Mykle Hansen) - beware clipping! gnoisem = gnoise * 0.625; // Equalizes loudness to that of no.noise (thanks Mykle Hansen) where the "m" suffix means "matched loudness" or something like that. Can anyone think of a better naming convention? Another possibility is "z" for zero-db-loudness, etc. I am happy to add similar normalized versions for anything I wrote (which does include the filter-based oscillators). Note that the pink_noise normalization will typically result in clipping at full scale, so less "pink" and more toward "white". - Julius On Sun, Mar 11, 2018 at 4:42 PM, Mykle Hansen <[email protected]> wrote: > Hello, > > I have a question about levels in Faust. > > I have been experimenting with various noise sources in Faust, > including the contents of noises.lib. I find that when trying > to design music/sound with these sources, it’s helpful to get > them all to a similar audible level. So I’ve started keeping > a list of coefficients, to adjust the different generators > to approximately equal amplitudes. > > I got into this while making a sound-effects generator > using noise. I needed to select between no.noise, no.gnoise > and no.pink_noise without an audible change in the levels. > Those three generators produce significantly different absolute levels; > To match them (approximately), I multiply no.gnoise by 0.625, > and no.pink_noise by 12.5. I believe that more exact > values can be determined mathematically but I mostly > used trial & error & a Faust dB meter. I arbitrarily chose > no.noise as the 1.0 reference level. > > I wonder if I am duplicating existing work here. Do such coefficients > exist somewhere in Faust already? > > If not, and it it sounds useful, I'd be happy to contribute > a simple library for this, or to add the coefficients to > other libraries (noises.lib and oscillators.lib) in some > agreeable format. > > -mykle- > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Faudiostream-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/faudiostream-users -- Julius O. Smith III <[email protected]> Professor of Music and, by courtesy, Electrical Engineering CCRMA, Stanford University http://ccrma.stanford.edu/~jos/ ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Faudiostream-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/faudiostream-users
