Hey everyone,
First post - hope you are all well and healthy and are in good spirits
despite #stayathome times.
Just getting into Faust and very much into electronics and modular
shenanigans: https://www.instagram.com/makingsoundmachines/
WHAT IS IN YOUR OPINION THE BEST MCU BASED HARDWARE OPTION TO RUN FAUST
ON?
We've had some success with Faust and the Teensy 3.6 + Audio Shield,
being able to run
- the Additive Synth sketch x2 = 16 oscrs 2 ADSR 2 resonant LP filters
- a poly version of the bandlimited saw = 8 sawtooth 8 adsr 8 resonant
LP filters
but there are equally as many tries when a simple sketch is too CPU
intense (e.g. a 4 voice Poly Additive Synth) and just wont run.
The big idea would be to design own cirtcuitry / PCBs e.g. CV Control
around a MCU that runs a simple-ish Faust sketch (Similar to the RT OWL
but more specific to a single concept).
We have experince with some STMs and the Cube IDE, and all kinds of
Arduino based stuff.
We haven't been able to get our hands on a Teensy 4.0. How big is the
improvement?
We haven't yet looked into the ESP 32 - is this the preferred route to
go?
Very much look forward to hear about your experiences with this. Any
hints and pointers are welcome.
All the best
Roland
--
Roland Nebe
Flurstr. 68
D-40235 Düsseldorf
facebook.com/roland.nebe
_______________________________________________
Faudiostream-users mailing list
Faudiostream-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/faudiostream-users
