Dear Thomas,
thank you for sharing this!
Compiled it and it's working! So cool!
All the best
Roland
Am 2020-04-06 19:24, schrieb Thomas Hopman:
> Hi Roland,
>
> you can find a (old) arduino example on the github repo for the ac101 driver
> that is included in faust.
>
> https://github.com/thopman/AC101/tree/master/examples
>
> with kind regards,
>
> Thomas
>
> Thomas Hopman - TomaTek - Paradiso - SureShot Studio
> +31 (0)6 17115051
>
> Op ma 6 apr. 2020 om 16:57 schreef Roland Nebe <rol...@groovelastig.de>:
>
> Hey everyone,
>
> first of all, thank you everyone who responded to our mail below. Hope all
> are healthy and in good spirit despite #stayathome.
>
> We opted for a Teensy 3.6 and Teensy 4.0 because we had those at hand, and
> they're great fun! Some of the results:
> https://www.instagram.com/p/B-cb1rKKUQd/
> https://www.instagram.com/p/B-oVKLxKuKK/
>
> Meanwhile, two Ai Thinker ESP32 audio kit showed up, the one pictured here
> with the A1S codec.
> https://faust.grame.fr/doc/tutorials/#dsp-on-the-esp32-with-faust
>
> We were able to compile and run the example by Ivo Pullens as found here:
> https://platformio.org/lib/show/6755/AC101
>
> However if we drop in a Faust library, we only get distorted sound (very fast
> chops like not fast enough to write the buffer).
>
> DOES ANYONE HAVE (A LINK TO) A WORKING EXAMPLE FOR ARDUINO, USING THAT BOARD?
> Just executing the standard sawtooth example?
>
> That would be super helpful!
>
> Thank you for your help, stay sane and safe and all the best
>
> Roland
>
> Am 2020-03-25 17:06, schrieb Roland Nebe:
>
> Hey everyone,
>
> First post - hope you are all well and healthy and are in good spirits
> despite #stayathome times.
>
> Just getting into Faust and very much into electronics and modular
> shenanigans: https://www.instagram.com/makingsoundmachines/
>
> WHAT IS IN YOUR OPINION THE BEST MCU BASED HARDWARE OPTION TO RUN FAUST ON?
>
> We've had some success with Faust and the Teensy 3.6 + Audio Shield, being
> able to run
> - the Additive Synth sketch x2 = 16 oscrs 2 ADSR 2 resonant LP filters
> - a poly version of the bandlimited saw = 8 sawtooth 8 adsr 8 resonant LP
> filters
>
> but there are equally as many tries when a simple sketch is too CPU intense
> (e.g. a 4 voice Poly Additive Synth) and just wont run.
>
> The big idea would be to design own cirtcuitry / PCBs e.g. CV Control around
> a MCU that runs a simple-ish Faust sketch (Similar to the RT OWL but more
> specific to a single concept).
>
> We have experince with some STMs and the Cube IDE, and all kinds of Arduino
> based stuff.
>
> We haven't been able to get our hands on a Teensy 4.0. How big is the
> improvement?
> We haven't yet looked into the ESP 32 - is this the preferred route to go?
>
> Very much look forward to hear about your experiences with this. Any hints
> and pointers are welcome.
>
> All the best
>
> Roland
>
> --
> Roland Nebe
> Flurstr. 68
> D-40235 Düsseldorf
>
> facebook.com/roland.nebe [1]
>
> --
> Roland Nebe
> Flurstr. 68
> D-40235 Düsseldorf
>
> +49 211 24790287
> +49 171 1211162
> +49 177 1810806
>
> rol...@groovelastig.de
>
> facebook.com/roland.nebe [1]
> facebook.com/warpedtype [2]
>
> http://www.groovelastig.de/ _______________________________________________
> Faudiostream-users mailing list
> Faudiostream-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/faudiostream-users
--
Roland Nebe
Flurstr. 68
D-40235 Düsseldorf
+49 211 24790287
+49 171 1211162
+49 177 1810806
rol...@groovelastig.de
facebook.com/roland.nebe
facebook.com/warpedtype
http://www.groovelastig.de/
Links:
------
[1] http://facebook.com/roland.nebe
[2] http://facebook.com/warpedtype
_______________________________________________
Faudiostream-users mailing list
Faudiostream-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/faudiostream-users
