Hi Roland, you can find a (old) arduino example on the github repo for the ac101 driver that is included in faust.
https://github.com/thopman/AC101/tree/master/examples with kind regards, Thomas Thomas Hopman - TomaTek - Paradiso - SureShot Studio +31 (0)6 17115051 Op ma 6 apr. 2020 om 16:57 schreef Roland Nebe <rol...@groovelastig.de>: > Hey everyone, > > first of all, thank you everyone who responded to our mail below. Hope all > are healthy and in good spirit despite #stayathome. > > We opted for a Teensy 3.6 and Teensy 4.0 because we had those at hand, and > they're great fun! Some of the results: > https://www.instagram.com/p/B-cb1rKKUQd/ > https://www.instagram.com/p/B-oVKLxKuKK/ > > > Meanwhile, two Ai Thinker ESP32 audio kit showed up, the one pictured here > with the A1S codec. > https://faust.grame.fr/doc/tutorials/#dsp-on-the-esp32-with-faust > > > We were able to compile and run the example by Ivo Pullens as found here: > https://platformio.org/lib/show/6755/AC101 > > However if we drop in a Faust library, we only get distorted sound (very > fast chops like not fast enough to write the buffer). > > > *Does anyone have (a link to) a working example for Arduino, using that > board?* > Just executing the standard sawtooth example? > > > That would be super helpful! > > > Thank you for your help, stay sane and safe and all the best > > Roland > > > > Am 2020-03-25 17:06, schrieb Roland Nebe: > > Hey everyone, > > > First post - hope you are all well and healthy and are in good spirits > despite #stayathome times. > > Just getting into Faust and very much into electronics and modular > shenanigans: https://www.instagram.com/makingsoundmachines/ > > > *What is in your opinion the best MCU based hardware option to run Faust > on?* > > > We've had some success with Faust and the Teensy 3.6 + Audio Shield, being > able to run > - the Additive Synth sketch x2 = 16 oscrs 2 ADSR 2 resonant LP filters > - a poly version of the bandlimited saw = 8 sawtooth 8 adsr 8 resonant LP > filters > > but there are equally as many tries when a simple sketch is too CPU > intense (e.g. a 4 voice Poly Additive Synth) and just wont run. > > > The big idea would be to design own cirtcuitry / PCBs e.g. CV Control > around a MCU that runs a simple-ish Faust sketch (Similar to the RT OWL but > more specific to a single concept). > > > We have experince with some STMs and the Cube IDE, and all kinds of > Arduino based stuff. > > We haven't been able to get our hands on a Teensy 4.0. How big is the > improvement? > We haven't yet looked into the ESP 32 - is this the preferred route to go? > > > Very much look forward to hear about your experiences with this. Any hints > and pointers are welcome. > > > All the best > > Roland > > > > -- > Roland Nebe > Flurstr. 68 > D-40235 Düsseldorf > > facebook.com/roland.nebe > > > -- > Roland Nebe > Flurstr. 68 > D-40235 Düsseldorf > > +49 211 24790287 > +49 171 1211162 > +49 177 1810806 > > rol...@groovelastig.de > > facebook.com/roland.nebe > facebook.com/warpedtype > > http://www.groovelastig.de/ > _______________________________________________ > Faudiostream-users mailing list > Faudiostream-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/faudiostream-users >
_______________________________________________ Faudiostream-users mailing list Faudiostream-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/faudiostream-users