Ok. Although they are a pain to try and contact, I would call Minolta about
your problem. I would also recheck your SCSI card's seating in the slot as
well as your termination settings and SCSI ID setting.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ramesh Kumar_C
Sent: Tuesday, April 17, 2001 4:01 PM
To: '[EMAIL PROTECTED]'
Subject: RE: filmscanners: "Minolta Dimage Scan Dula II" Problems
I too doubted the same and yestarday I installed the driver software which
is displayed
in the www.minoltausa.com. This did not solve anything.
It seems problem is due to software because it scanner reboots the PC.
-----Original Message-----
From: Laurie Solomon [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 17, 2001 10:44 AM
To: [EMAIL PROTECTED]
Subject: RE: filmscanners: "Minolta Dimage Scan Dula II" Problems
Just a guess; but have you checked with Minolta to make sure that you have
the most recent Win2K compatible driver. I would chek the Minolta web site.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ramesh Kumar_C
Sent: Tuesday, April 17, 2001 11:41 AM
To: '[EMAIL PROTECTED]'
Subject: filmscanners: "Minolta Dimage Scan Dula II" Problems
Hi
My 2-weeks old Minolta Dimage Scan Dula II has following problem.
"HOLDER NOT SET PROPERLY ERROR = 36" message box comes.
After getting this error anything of the following may happen
a) When I switch off the scanner, my PC gets rebooted.
b) Normally I will not be able scan but if I am able to scan, scans will be
completely GREEN or MEGANTA
To get over this error I need to reinstall the minolta software.
But after scanning another 6 films again I will get same error.
Environment: I am running Win 2k & Minolta "Easy Scan Utility"
Any help will be welcome.
Thanks
Ramesh