Hi!
I use Vuescan (www.hamrick.com/vsm.html) with my Minolta Dimage Scan Multi, I
recommended it to a friend who has a Scan Dual II, and he was very
satisfied.You may as well try Vuescan. Ed Hamrick, the author of Vuescan, is
very helpful.
Regards
Erik
n Tuesday 17 April 2001 23:00, you wrote:
> I too doubted the same and yestarday I installed the driver software which
> is displayed
> in the www.minoltausa.com. This did not solve anything.
> It seems problem is due to software because it scanner reboots the PC.
>
>
>
> -----Original Message-----
> From: Laurie Solomon [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, April 17, 2001 10:44 AM
> To: [EMAIL PROTECTED]
> Subject: RE: filmscanners: "Minolta Dimage Scan Dula II" Problems
>
>
> Just a guess; but have you checked with Minolta to make sure that you have
> the most recent Win2K compatible driver. I would chek the Minolta web
> site.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Ramesh Kumar_C
> Sent: Tuesday, April 17, 2001 11:41 AM
> To: '[EMAIL PROTECTED]'
> Subject: filmscanners: "Minolta Dimage Scan Dula II" Problems
>
>
> Hi
> My 2-weeks old Minolta Dimage Scan Dula II has following problem.
>
> "HOLDER NOT SET PROPERLY ERROR = 36" message box comes.
> After getting this error anything of the following may happen
> a) When I switch off the scanner, my PC gets rebooted.
> b) Normally I will not be able scan but if I am able to scan, scans will be
> completely GREEN or MEGANTA
>
> To get over this error I need to reinstall the minolta software.
> But after scanning another 6 films again I will get same error.
>
> Environment: I am running Win 2k & Minolta "Easy Scan Utility"
>
>
> Any help will be welcome.
>
> Thanks
> Ramesh
--
Erik Kaffehr [EMAIL PROTECTED] alt. [EMAIL PROTECTED]
Mariebergsvägen 53 +46 155 219338 (home)
S-611 66 Nyköping +46 155 263515 (office)
Sweden -- Message sent using 100% recycled electrons --
