On 3.7.2002 20:31, "Andrew Stiller" <[EMAIL PROTECTED]> wrote:
>> >> Andrew, >> >> Check to see that the AppleTalk control panel is set to connect via >> the printer port (you can use either serial port), and that >> AppleTalk is active. > ... > >> Tim Thompson > > That did the trick; thanks! Now a purely mechanical problem (or 2): > the paper jams all the time, viz., it comes out of the tray and then > crumples into folds where it should be feeding past the toner > cartridge. Also, how do I take out the paper tray? It has an obvious > handle, but when I pull on it the tray doesn't want to emerge at all. > > Wish I had a manual... There are two light-blue guides in the paper-tray, take care they are pushed against the paper stack, if the one on the righthand side is loose the paper can skew on its way past the cartridge. The paper tray was very, very stiff, at least on my printer, I had to use force to pull it out. I remember lifting and lowering the pin that sticks out of the sides of the tray and now its one finger under the handle and a thumb against the case and the tray slides out easily. Cortez _______________________________________________ Finale mailing list [EMAIL PROTECTED] http://mail.shsu.edu/mailman/listinfo/finale
