Ryan Beard wrote:
Hi All,
I need to easily combine movements that are in
separate files into one file for easy part printing.
If you manage to do this you have more patience (or more luck) than I.
The times I have faced similar needs, I have found the most expedient
solution (that is the one that took the least time, and effort) was to
leave the movements separate, extract the parts, and adjust them to
print on the page in the desired positions, and run the necessary sheets
of paper bearing parts of more than one file as many times as needed to
print the bits of the part from each movement. Thus, if movement one is
one and a half pages long, and movement 2 is one and a half pages long,
the page containing the second part of movement one, and the first part
of movement two, gets fed through the printer twice, once to print the
bit for movement one, and once for movement 2, adjusting the first
system (or in an instrumental part, staff) of movement 2 to print and
the appropriate distance down the page.
ns
_______________________________________________
Finale mailing list
[email protected]
http://lists.shsu.edu/mailman/listinfo/finale
