Well, I can only speak to my present case, but I found that after I
extracted the parts from the score, which was in legal size format,
and wished to print the parts in 8.5x11, when the parts opened up,
they needed a lot of adjusting from the default presentation.
Hairpins needed moving, measure numbers needed adjusting as to size
and position ... etc.
Dean
On Dec 21, 2005, at 1:24 PM, David W. Fenton wrote:
On 21 Dec 2005 at 10:54, Brad Beyenhof wrote:
Actually, Dean, if you haven't done much work on the files since
extraction I would very much recommend creating a separate Parts
score
as Johannes suggested. I was under the impression that you had
already
done some work on the files individually and didn't want to have to
re-extract. If this is not an issue, a new Parts score is what I
always use to change sizes and such for the parts.
Please explain to me why you need to do this. I don't get it, since
the settings for most things in parts are controllable simply by
setting them in the default parts page layout or at the time that you
extract parts.
What aspects of layout are fixed by forking the file before you
extract parts?
--
David W. Fenton http://dfenton.com
David Fenton Associates http://dfenton.com/DFA/
_______________________________________________
Finale mailing list
[email protected]
http://lists.shsu.edu/mailman/listinfo/finale
_______________________________________________
Finale mailing list
[email protected]
http://lists.shsu.edu/mailman/listinfo/finale
