Hi, Well, the man pages say a lot about this :)
Try adding the line "usb 0x04b8 0x010b" to /sw/etc/sane.d/epson.conf
If that does not work then try adding
"libusb:-07:005"
but note that you will have to edit the config file each time you plug in the scanner if you use the second method.
Hope this helps, Peter
On Friday, June 6, 2003, at 08:08 AM, Eric Jacoboni wrote:
Hi,
I've successfully installed sane and xsane from fink, but i'm unable to find out how to configure sane to make it recognize my Epson 1240U scanner.
Running sane-find-scanner -v -v gives:
searching for USB scanners: trying libusb:
<device descriptor of 0x04b8/0x010b at -07:005 (EPSON Perfection1240)>
(...)
found USB scanner (vendor=0x04b8 [EPSON], product=0x010b [Perfection1240]) at libusb:-07:005
------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ Fink-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/fink-users
