On Mar 17, 2007, at 2:21 AM, Jonathan Guyer wrote:
Are there command line options to get gmsh 2 to spit out
1.0 file format?
It's on our to-do list to figure out. I'll see what I can come up
with.
Jon, Is Charles getting the right results (fipy has the right face
ordering), but Mayavi is just spitting out
strange output (mayavi has the wrong face ordering)? Either way, I
think we might want to get together
and fix fipy to work with gmsh 2.
I assume the ordering is correct as far as the solver goes :-)
I'm not sure I'd jump to that conclusion. ;^)
How can the patterns in https://www.matforge.org/fipy/attachment/wiki/
SurfaceOfSphere/sphere_face.png be so reasonable?
Surely the results would be nonsense? The blue and red patches (other
than the black faces) seem to be about right.
I don't see the face inversion problem that you're getting when I
use gmsh 1.6something, so evidently manual 1.0 export isn't the
same thing. Triangular prisms have worked OK for us; that warning
was generally referring to things with more faces, but evidently
even triangles aren't reliable.
--
Jonathan E. Guyer, PhD
Metallurgy Division
National Institute of Standards and Technology
<http://www.metallurgy.nist.gov/>
--
Daniel Wheeler
