Hi, On Mon, Nov 23, 2009 at 10:52 PM, Thao Hoang <[email protected]> wrote: > > Thanks Adrian! I appreciate the advice and insight.
You're welcome, again. > I was not able to run superiotool because it wasn't install on my system, > however I did run the other two. > See attachment. If you really need me to run superiotool, I can download it > and run it. > Yes, please install it. It would be nice to have a full output of: lspci -nnvvvxx superiotool -dV flashrom -V By the way, I don't see your attachments, did you forget them (thats what I usually do :)). Please post the put of all three tools like I suggested to the mailing list ([email protected]), that will help us with your board. > Don't laugh... but I haven't used IRC chat before. Never had a reason to > until now I guess. Is there a way to post the chats somewhere so that anyone > with a similar problem can go there without taking up your time? hum... > Well, really, IRC is nothing magical or mystical. Just use any IRC-capable software to connect (like irssi, pidgin, xchat or mIRC). Set the server to irc.freenode.org and the channel to #flashrom. Then just start asking questions and many people will be happy to help you and answer all your questions. > Also, did I get the syntax correct to force a write <./flashrom -f -w > (filename) -c (chipname)>. Yes, think so. Check the manpage. > I have a laptop also that doesn't seem to work off the bat. I was able to > force the read and > find some chips that successfullly read the bios. (i.e.... forced read and > compared the result > using the original binary which I extracted using a dos bios utility.) Mhh, okey. Don't hesitate to post all your results to the mailing list. Please post every laptop and mainboard and whatever your try to flash in a single mail to the mailing list. And seriously, join the IRC-channel. You'll learn alot of stuff there. Adrian _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
