Hello again, Am 17.06.2010 um 16:00 schrieb Carl-Daniel Hailfinger: > > Side note: My AAI patch on the list might result in a faster write if > you change the write function for your chip in flashchips.c. It does not > support progres printing, though, so you might want to wait for an > updated progress printing patch. >
I think I will wait for a combination of the AAI patch + Progress bar + 3x BP-Speedpatch. > > I think I read somewhere on dangerousprototypes.com that OpenOCD support > was broken in some firmware versions. We use essentially the same interface. > Anyway, I reported your problem here: > http://dangerousprototypes.com/forum/index.php?topic=651.0 So they suggest to send a dummy spi command first and then start. Thats a quick and dirty workaround. Shall I hang in a Logic Analyzer between the Bus-Pirate and the spi-flash to figure out the communication exactly ? By the way: The flashing yesterday was not only sucessfull, Bus-Pirate and Flashrom saved my bricked T3H6 mainboard and the pc is running perfectly again. Thanks for all the support on this. And I heard through the grapevine that a pirate in a bus is driving to Tübingen somewhere in the next 2-3 weeks ;-) Cheers, Daniel -- -- www.Flinkmann.de : Unix, Mac, Photography -- -- www.Hijet.de : Daihatsu and Japan related stuff -- _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
