Hi Carl-Daniel, Thanks a lot for the response. Please see my response inline.
With thanks & regards, Ramakrishna Kvv Embedded Computing Emerson Network Power T +9140 66747045 M + 919246659136 [email protected] www.emersonnetworkpower.com/embeddedcomputing -----Original Message----- From: Carl-Daniel Hailfinger [mailto:[email protected]] Sent: Friday, June 18, 2010 5:27 AM To: Ramakrishna, Koduri [NETPWR/HYDE] Cc: [email protected] Subject: Re: [flashrom] Flash erasing failed mid way on Atmel AT25DF321 flash chip Hi Ramakrishna, is this a production system you have to recover now, or can you reflash externally if something goes wrong? --> Yes. It is the production that I need to recover. This failure wiped out the existing BIOS on the flash. I am exploring to see any other option other than JTAG interface for bringing back. Flashrom worked many times for this. I don't know somehow this got failed in this attempt. On 17.06.2010 16:26, [email protected] wrote: > I have tried upgrading BIOS image using flashrom v0.9.2-r1001. > Surprisingly it failed in this attempt. > > I did many times upgrade of BIOS using flashrom utility of above said > version. > Earlier it was done by internal programmer with erase function-2. > > [r...@localhost images]# flashrom -V -w atca-7360-cpu-v1.1.1.rom > flashrom v0.9.2-r1001 on Linux 2.6.18-194.el5xen (x86_64), built with > libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-48) Initializing > internal programmer No coreboot table found. > DMI string system-manufacturer: "Emerson" > DMI string system-product-name: "PCA,ATCA-7360/R1.0/6E " > DMI string system-version: "R1.0 " > DMI string baseboard-manufacturer: "Emerson" > DMI string baseboard-product-name: "ATCA-7360/7365" > DMI string baseboard-version: "0106865F01A " > DMI string chassis-type: "" > Found chipset "Intel ICH10R", enabling flash write... > Maximum FWH chip size: 0x380000 bytes > BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is > 0x9 > > Root Complex Register Block address = 0xfed1c000 GCS = 0x460: BIOS > Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 > (SPI) > Top Swap : not enabled > SPIBAR = 0xfed1c000 + 0x3800 > 0x04: 0x6008 (HSFS) > FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 > 0x50: 0x00001b1b (FRAP) > BMWAG 0, BMRAG 0, BRWA 27, BRRA 27 > 0x54: 0x00010000 (FREG0) > 0x58: 0x03ff0080 (FREG1) > 0x5C: 0x00001fff (FREG2) > 0x60: 0x00030002 (FREG3) > 0x64: 0x007f0004 (FREG4) > 0x74: 0x00000000 (PR0) > 0x78: 0x00000000 (PR1) > 0x7C: 0x00000000 (PR2) > 0x80: 0x00000000 (PR3) > 0x84: 0x00000000 (PR4) > 0x90: 0x007f100c (SSFS, SSFC) > 0x94: 0x0006 (PREOP) > 0x96: 0x463b (OPTYPE) > 0x98: 0x05d80302 (OPMENU) > 0x9C: 0xc79f0190 (OPMENU+4) > 0xA0: 0x00000000 (BBAR) > 0xB0: 0x00004000 (FDOC) > Programming OPCODES... > program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done > SPI Read Configuration: prefetching enabled, caching enabled, OK. > This chipset supports the following protocols: FWH,SPI. > Calibrating delay loop... 1062M loops per second, 10 myus = 12 us, 100 > myus = 101 us, 1000 myus = 999 us, 10000 myus = 10005 us, OK. > Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 > 0x1f, > id2 0x4700 > Chip status register is 10 > Found chip "Atmel AT25DF321" (4096 KB, SPI) at physical address > 0xffc00000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Some block protection in effect, disabling > Erasing flash before programming... Erasing flash chip... Looking at > blockwise erase function 0... trying... 0x000000-0x000fff, > ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the > chipset opcode list. > Invalid OPCODE 0x20 > spi_block_erase_20 failed during command execution at address 0x0 > > Looking at blockwise erase function 1... trying... 0x000000-0x007fff, > ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the > chipset opcode list. > Invalid OPCODE 0x52 > spi_block_erase_52 failed during command execution at address 0x0 > > Looking at blockwise erase function 2... trying... 0x000000-0x00ffff, > 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, > 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, > 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, > 0x0a0000-0x0affff, ERASE FAILED at 0x000a0800! Expected=0xff, > Read=0x1f,Transaction error! > run OPCODE 0x03 failed > Transaction error! > [...] > run OPCODE 0x03 failed > Transaction error! > Ah yes. This means your current BIOS version somehow blocks reading of some regions. You could try flashrom r1016 or later which has improved region protection handling. --> I am surprised to see why it should block some regions. May be once the board is UP, I shall give a try using flashrom r1016 version. > failed byte count from 0x000a0000-0x000affff: 0x1a ERASE FAILED! > > Looking at blockwise erase function 3... trying... 0x000000-0x3fffff, > Some block protection in effect, disabling > ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the > chipset opcode list. > Invalid OPCODE 0x60 > spi_chip_erase_60 failed during command execution > > Looking at blockwise erase function 4... trying... 0x000000-0x3fffff, > Some block protection in effect, disabling > It would be interesting to check if reading the complete chip works. I think it probably won't work. Please report back with the verbose results of a pure read test. --> The current state of the system is not usable any more due to boardreset immediately after the flashrom failed. It didn't give me any chance to repair system back. I have the traces of previously successful write operation. Please find the same here. ======================================================================== =================================== [r...@localhost flashrom-0.9.2]# ./flashrom -V -l layout -w atca7360-bios.img -i part_2000_4000.log flashrom v0.9.2-r1001 on Linux 2.6.18-194.el5PAE (i686), built with libpci 2.2.3, GCC 4.1.2 20080704 (Red Hat 4.1.2-48) flashrom is free software, get the source code at http://www.flashrom.org romlayout 00002000 - 00003fff named /mnt/root/ramki/flashrom-0.9.2/part_2000_4000.log Looking for "part_2000_4000.log"... not found. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "Emerson" DMI string system-product-name: "PCA,ATCA-7360/R1.0/6E " DMI string system-version: "R1.0 " DMI string baseboard-manufacturer: "Emerson" DMI string baseboard-product-name: "ATCA-7360/7365" DMI string baseboard-version: "0106865F01A " DMI string chassis-type: "" Found chipset "Intel ICH10R", enabling flash write... 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x0 0x7fffffff/0x7fffffff FWH IDSEL: 0x4 0x7fffffff/0x7fffffff FWH IDSEL: 0x5 0x7fffffff/0x7fffffff FWH IDSEL: 0x6 0x7fffffff/0x7fffffff FWH IDSEL: 0x7 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode enabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled 0x7fffffff/0x7fffffff FWH decode disabled Maximum FWH chip size: 0x380000 bytes BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x9 Root Complex Register Block address = 0xfed1c000 GCS = 0x460: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3800 0x04: 0x6008 (HSFS) FLOCKDN 0, FDV 1, FDOPSS 1, SCIP 0, BERASE 1, AEL 0, FCERR 0, FDONE 0 0x50: 0x00001b1b (FRAP) BMWAG 0, BMRAG 0, BRWA 27, BRRA 27 0x54: 0x00010000 (FREG0) 0x58: 0x03ff0080 (FREG1) 0x5C: 0x00001fff (FREG2) 0x60: 0x00030002 (FREG3) 0x64: 0x007f0004 (FREG4) 0x74: 0x00000000 (PR0) 0x78: 0x00000000 (PR1) 0x7C: 0x00000000 (PR2) 0x80: 0x00000000 (PR3) 0x84: 0x00000000 (PR4) 0x90: 0x007f100c (SSFS, SSFC) 0x94: 0x0006 (PREOP) 0x96: 0x463b (OPTYPE) 0x98: 0x05d80302 (OPMENU) 0x9C: 0xc79f0190 (OPMENU+4) 0xA0: 0x00000000 (BBAR) 0xB0: 0x00004000 (FDOC) Programming OPCODES... program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 done SPI Read Configuration: prefetching enabled, caching enabled, OK. This chipset supports the following protocols: FWH,SPI. Calibrating delay loop... 1091M loops per second, 10 myus = 10 us, 100 myus = 103 us, 1000 myus = 1029 us, 10000 myus = 10073 us, OK. Probing for AMD Am29F010A/B, 128 KB: skipped. Probing for AMD Am29F002(N)BB, 256 KB: skipped. Probing for AMD Am29F002(N)BT, 256 KB: skipped. Probing for AMD Am29F016D, 2048 KB: skipped. Probing for AMD Am29F040B, 512 KB: skipped. Probing for AMD Am29F080B, 1024 KB: skipped. Probing for AMD Am29LV040B, 512 KB: skipped. Probing for AMD Am29LV081B, 1024 KB: skipped. Probing for ASD AE49F2008, 256 KB: skipped. Probing for Atmel AT25DF021, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF041A, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF081, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF321, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Chip status register is 10 Found chip "Atmel AT25DF321" (4096 KB, SPI) at physical address 0xffc00000. Probing for Atmel AT25DF321A, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25DF641, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25F512B, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25FS010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT25FS040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF041, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF081A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF161, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26DF161A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT26F004, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT29C512, 64 KB: skipped. Probing for Atmel AT29C010A, 128 KB: skipped. Probing for Atmel AT29C020, 256 KB: skipped. Probing for Atmel AT29C040A, 512 KB: skipped. Probing for Atmel AT45CS1282, 16896 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB011D, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB021D, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB041D, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB081D, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB161D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB321C, 4224 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB321D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT45DB642D, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Atmel AT49BV512, 64 KB: skipped. Probing for Atmel AT49F002(N), 256 KB: skipped. Probing for Atmel AT49F002(N)T, 256 KB: skipped. Probing for AMIC A25L40PT, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A25L40PU, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for AMIC A29002B, 256 KB: skipped. Probing for AMIC A29002T, 256 KB: skipped. Probing for AMIC A29040B, 512 KB: skipped. Probing for AMIC A49LF040A, 512 KB: skipped. Probing for EMST F49B002UA, 256 KB: skipped. Probing for Eon EN25B05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B05T, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B10T, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B20T, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B40T, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B80T, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B16T, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B32T, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25B64T, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25D16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F05, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN25F32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Eon EN29F010, 128 KB: skipped. Probing for EON EN29F002(A)(N)B, 256 KB: skipped. Probing for EON EN29F002(A)(N)T, 256 KB: skipped. Probing for Fujitsu MBM29F004BC, 512 KB: skipped. Probing for Fujitsu MBM29F004TC, 512 KB: skipped. Probing for Fujitsu MBM29F400BC, 512 KB: skipped. Probing for Fujitsu MBM29F400TC, 512 KB: skipped. Probing for Intel 28F001BX-B, 128 KB: skipped. Probing for Intel 28F001BX-T, 128 KB: skipped. Probing for Intel 28F004S5, 512 KB: skipped. Probing for Intel 28F004BV/BE-B, 512 KB: skipped. Probing for Intel 28F004BV/BE-T, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-B, 512 KB: skipped. Probing for Intel 28F400BV/CV/CE-T, 512 KB: skipped. Probing for Intel 82802AB, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Intel 82802AC, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Macronix MX25L512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1005, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L2005, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L4005, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L8005, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L3205, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L3235D, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L6405, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX25L12805, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix MX29F001B, 128 KB: skipped. Probing for Macronix MX29F001T, 128 KB: skipped. Probing for Macronix MX29F002B, 256 KB: skipped. Probing for Macronix MX29F002T, 256 KB: skipped. Probing for Macronix MX29LV040, 512 KB: skipped. Probing for Numonyx M25PE10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Numonyx M25PE20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Numonyx M25PE40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Numonyx M25PE80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Numonyx M25PE16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV010, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV020, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV040, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm25LV512, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC Pm29F002T, 256 KB: skipped. Probing for PMC Pm29F002B, 256 KB: skipped. Probing for PMC Pm39LV010, 128 KB: skipped. Probing for PMC Pm39LV020, 256 KB: skipped. Probing for PMC Pm39LV040, 512 KB: skipped. Probing for PMC Pm49FL002, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for PMC Pm49FL004, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Sanyo LF25FW203A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Sharp LHF00L04, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Spansion S25FL008A, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Spansion S25FL016A, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF016B, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF032B, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF040.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF040B, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST25VF040B.REMS, 512 KB: probe_spi_rems: id1 0x0, id2 0x0 Probing for SST SST25VF080B, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST SST28SF040A, 512 KB: skipped. Probing for SST SST29EE010, 128 KB: skipped. Probing for SST SST29LE010, 128 KB: skipped. Probing for SST SST29EE020A, 256 KB: skipped. Probing for SST SST29LE020, 256 KB: skipped. Probing for SST SST39SF512, 64 KB: skipped. Probing for SST SST39SF010A, 128 KB: skipped. Probing for SST SST39SF020A, 256 KB: skipped. Probing for SST SST39SF040, 512 KB: skipped. Probing for SST SST39VF512, 64 KB: skipped. Probing for SST SST39VF010, 128 KB: skipped. Probing for SST SST39VF020, 256 KB: skipped. Probing for SST SST39VF040, 512 KB: skipped. Probing for SST SST39VF080, 1024 KB: skipped. Probing for SST SST49LF002A/B, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF003A/B, 384 KB: probe_jedec_common: id1 0x40, id2 0x11, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004A/B, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF004C, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008A, 1024 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF008C, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF016C, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for SST SST49LF020, 256 KB: skipped. Probing for SST SST49LF020A, 256 KB: skipped. Probing for SST SST49LF040, 512 KB: skipped. Probing for SST SST49LF040B, 512 KB: skipped. Probing for SST SST49LF080A, 1024 KB: skipped. Probing for SST SST49LF160C, 2048 KB: skipped. Probing for ST M25P05-A, 64 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P05.RES, 64 KB: Ignoring RES in favour of RDID. Probing for ST M25P10-A, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P10.RES, 128 KB: Ignoring RES in favour of RDID. Probing for ST M25P20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P40-old, 512 KB: Ignoring RES in favour of RDID. Probing for ST M25P80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M25P128, 16384 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST M29F002B, 256 KB: skipped. Probing for ST M29F002T/NT, 256 KB: skipped. Probing for ST M29F040B, 512 KB: skipped. Probing for ST M29F400BT, 512 KB: skipped. Probing for ST M29W010B, 128 KB: skipped. Probing for ST M29W040B, 512 KB: skipped. Probing for ST M29W512B, 64 KB: skipped. Probing for ST M50FLW040A, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW040B, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080A, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FLW080B, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW002, 256 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW016, 2048 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW040, 512 KB: probe_82802ab: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for ST M50FW080, 1024 KB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for ST M50LPW116, 2048 KB: skipped. Probing for SyncMOS S29C31004T, 512 KB: skipped. Probing for SyncMOS S29C51001T, 128 KB: skipped. Probing for SyncMOS S29C51002T, 256 KB: skipped. Probing for SyncMOS S29C51004T, 512 KB: skipped. Probing for TI TMS29F002RB, 256 KB: skipped. Probing for TI TMS29F002RT, 256 KB: skipped. Probing for Winbond W25Q80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25Q32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x10, 128 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x20, 256 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x40, 512 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x80, 1024 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x16, 2048 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x32, 4096 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W25x64, 8192 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Winbond W29C011, 128 KB: skipped. Probing for Winbond W29C020C, 256 KB: skipped. Probing for Winbond W29C040P, 512 KB: skipped. Probing for Winbond W29EE011, 128 KB: skipped. Probing for Winbond W39V040A, 512 KB: skipped. Probing for Winbond W39V040B, 512 KB: skipped. Probing for Winbond W39V040C, 512 KB: skipped. Probing for Winbond W39V040FA, 512 KB: probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080A, 1024 KB: skipped. Probing for Winbond W49F002U, 256 KB: skipped. Probing for Winbond W49V002A, 256 KB: skipped. Probing for Winbond W49V002FA, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA, 1024 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content Probing for Winbond W39V080FA (dual mode), 512 KB: Chip lacks correct probe timing information, using default 10mS/40uS. probe_jedec_common: id1 0xea, id2 0xd0, id1 is normal flash content, id2 is normal flash content Probing for Atmel unknown Atmel SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for EON unknown EON SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Macronix unknown Macronix SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for PMC unknown PMC SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for SST unknown SST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for ST unknown ST SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Sanyo unknown Sanyo SPI chip, 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Generic unknown SPI chip (RDID), 0 KB: probe_spi_rdid_generic: id1 0x1f, id2 0x4700 Probing for Generic unknown SPI chip (REMS), 0 KB: probe_spi_rems: id1 0x0, id2 0x0 === This flash part has status UNTESTED for operations: ERASE The test status of this chip may have been updated in the latest development version of flashrom. If you are running the latest development version, please email a report to [email protected] if any of the above operations work correctly for you with this flash part. Please include the flashrom output with the additional -V option for all operations you tested (-V, -Vr, -Vw, -VE), and mention which mainboard or programmer you tested. Thanks for your help! === Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... Some block protection in effect, disabling Erasing flash before programming... Erasing flash chip... Looking at blockwise erase function 0... trying... 0x000000-0x000fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list. Invalid OPCODE 0x20 spi_block_erase_20 failed during command execution at address 0x0 Looking at blockwise erase function 1... trying... 0x000000-0x007fff, ich_spi_send_multicommand: FIXME: Add on-the-fly reprogramming of the chipset opcode list. Invalid OPCODE 0x52 spi_block_erase_52 failed during command execution at address 0x0 Looking at blockwise erase function 2... trying... 0x000000-0x00ffff, 0x010000-0x01ffff, 0x020000-0x02ffff, 0x030000-0x03ffff, 0x040000-0x04ffff, 0x050000-0x05ffff, 0x060000-0x06ffff, 0x070000-0x07ffff, 0x080000-0x08ffff, 0x090000-0x09ffff, 0x0a0000-0x0affff, 0x0b0000-0x0bffff, 0x0c0000-0x0cffff, 0x0d0000-0x0dffff, 0x0e0000-0x0effff, 0x0f0000-0x0fffff, 0x100000-0x10ffff, 0x110000-0x11ffff, 0x120000-0x12ffff, 0x130000-0x13ffff, 0x140000-0x14ffff, 0x150000-0x15ffff, 0x160000-0x16ffff, 0x170000-0x17ffff, 0x180000-0x18ffff, 0x190000-0x19ffff, 0x1a0000-0x1affff, 0x1b0000-0x1bffff, 0x1c0000-0x1cffff, 0x1d0000-0x1dffff, 0x1e0000-0x1effff, 0x1f0000-0x1fffff, 0x200000-0x20ffff, 0x210000-0x21ffff, 0x220000-0x22ffff, 0x230000-0x23ffff, 0x240000-0x24ffff, 0x250000-0x25ffff, 0x260000-0x26ffff, 0x270000-0x27ffff, 0x280000-0x28ffff, 0x290000-0x29ffff, 0x2a0000-0x2affff, 0x2b0000-0x2bffff, 0x2c0000-0x2cffff, 0x2d0000-0x2dffff, 0x2e0000-0x2effff, 0x2f0000-0x2fffff, 0x300000-0x30ffff, 0x310000-0x31ffff, 0x320000-0x32ffff, 0x330000-0x33ffff, 0x340000-0x34ffff, 0x350000-0x35ffff, 0x360000-0x36ffff, 0x370000-0x37ffff, 0x380000-0x38ffff, 0x390000-0x39ffff, 0x3a0000-0x3affff, 0x3b0000-0x3bffff, 0x3c0000-0x3cffff, 0x3d0000-0x3dffff, 0x3e0000-0x3effff, 0x3f0000-0x3fffff, SUCCESS. done. Programming page: COMPLETE. Verifying flash... VERIFIED. ======================================================================== =================================== _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
