Im working with a HW unit (similar to the ICH10), that has two SPI devices
connected.
enum ich_spi_mode {
ich_auto,
ich_hwseq,
ich_swseq
} ich_spi_mode = ich_auto;
And I cannot use the ich_hwseq (which is propsed) because the Intel Chipset is
only capable of erasing:
00: 256 byte
01: 4 KB
10: 8 KB
11: 64 KB
And my flash chip, only support Sector erase/ or Bulk (but I don't like that
one) and each sector is 256kB.
So how can I proceed here? As I understand I cannot use the hw_seq and have to
go for the sw_seq. But then how to handle the chip-select? When Im running the
sw_seq I can only use one flash device, ..
Thanks for support
Magnus Johansson
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
