Version 3.13AG
1. rigCAT mods
Restructured i/o to allow use with broadcast transceivers.
Icom 7xxx series default to a CI-V server that broadcasts
serial data which disrupted fldigi serial data stream extract.
New code passed tests on Vista with IC-746Pro operating in
CI-V Transceive (server) mode.
2. Serial i/o Stopbits
Added stopbits configuration for hamlib and rigcat serial i/o
3. Dom/Thor mod
Modified squelch evaluator for increased sensitivity
4. QRZ lookup
Added post thread startup delay to allow OS to set up
conditionals.
Notes:
1. rigCAT mods should provide better cat i/o with all makes of
transceiver. You may need to adjust your timing. This is a major
rewrite to the rigCAT execution code.
2. You need to know whether your transceiver uses 1 or 2 stop bits.
Icom 7xxx series are usually 1 stop bit. Kenwoods are usually 2
stop bits. I would like to know what performance you see with a
TS50 or TS450. This mod was targeted at the 2 stop bit transceivers.
3. Squelch for DominoEX and Thor modes should be faster acting and
also closer in level to PSK modes.
4. This should correct the 2x - 1st time QRZ problem on MS and some
Linux distros.
* http://www.w1hkj.com/friday/fldigi-3.13AG.tar.gz
* http://www.w1hkj.com/friday/fldigi-3.13AG.bin.tgz
* http://www.w1hkj.com/friday/fldigi-3.13AG.npa.bin.tgz
* http://www.w1hkj.com/friday/fldigi-3.13AG_setup.exe
73, Dave, W1HKJ
for the development team
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://lists.berlios.de/pipermail/fldigi-alpha/attachments/20090915/81392e6d/attachment.html
