When using rigCat with my IC706MK2G it works fine the only thing I can't figure out is it always says Non-Cat Mode above the Frequency Display..
73 Rick N2AMG From: [email protected] [mailto:fldigi-alpha-bounces at lists.berlios.de] On Behalf Of w1hkj Sent: Tuesday, September 15, 2009 3:25 PM To: fldigi-alpha Subject: fldigi 3.13AG posted Version 3.13AG 1. rigCAT mods Restructured i/o to allow use with broadcast transceivers. Icom 7xxx series default to a CI-V server that broadcasts serial data which disrupted fldigi serial data stream extract. New code passed tests on Vista with IC-746Pro operating in CI-V Transceive (server) mode. 2. Serial i/o Stopbits Added stopbits configuration for hamlib and rigcat serial i/o 3. Dom/Thor mod Modified squelch evaluator for increased sensitivity 4. QRZ lookup Added post thread startup delay to allow OS to set up conditionals. Notes: 1. rigCAT mods should provide better cat i/o with all makes of transceiver. You may need to adjust your timing. This is a major rewrite to the rigCAT execution code. 2. You need to know whether your transceiver uses 1 or 2 stop bits. Icom 7xxx series are usually 1 stop bit. Kenwoods are usually 2 stop bits. I would like to know what performance you see with a TS50 or TS450. This mod was targeted at the 2 stop bit transceivers. 3. Squelch for DominoEX and Thor modes should be faster acting and also closer in level to PSK modes. 4. This should correct the 2x - 1st time QRZ problem on MS and some Linux distros. * http://www.w1hkj.com/friday/fldigi-3.13AG.tar.gz * http://www.w1hkj.com/friday/fldigi-3.13AG.bin.tgz * http://www.w1hkj.com/friday/fldigi-3.13AG.npa.bin.tgz * http://www.w1hkj.com/friday/fldigi-3.13AG_setup.exe 73, Dave, W1HKJ for the development team -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.berlios.de/pipermail/fldigi-alpha/attachments/20090915/8f8a0633/attachment.html
