On Fri, Apr 9, 2010 at 12:24 PM, Ben <[email protected]> wrote:
> Generally: > > 1) Tune your radio USB to 1.9 KHz below listed freq > 2) Signal is from 1500 Hz (black) to 2300 Hz (white) > 3) Narrow bandwidth on receiver if you can > 4) There is a separate FAX reception window, see menu > > Signals on the frequencies are often also RTTY 850; same station, too. The > FAX and RTTY alternates for some stations. > > Easy calculation: (a) subtract 2 KHz; (b) add .1 KHz. > > So 17147.4 = 17145.4, then *17145.5 > * > > On Fri, Apr 9, 2010 at 11:59 AM, Roger Beever < > [email protected]> wrote: > >> On Fri, 2010-04-09 at 13:54 -0400, Ed wrote: >> > Pino Zollo wrote: >> > >> > > Hi, >> > > I am trying to decode Chile station at 17146.4 ....the signal is 9+30 >> but I do >> > > not understand how to put the radio ....and fldigi: >> > > >> > > Is USB ok or should be AM ? F3C emission ? >> > > >> > > IOC288 or IOC576 ? How to know which is which ? >> > > >> > > Where should be the centre mark (hair pin)? >> > > >> > > I have tried many different set-up but got just noise. >> > > >> > > Thanks for any suggestion. >> > > >> > > Pino ZP4KFX >> > >> > I used USB, centered the trace on the waterfall, used the manual mode >> > and IOC576. >> > >> > The auto setting did not decode anything here. >> > >> > I noticed the right waterfall trace was much stronger than the left. >> > >> > Ed W3NR >> >> I don't seems to see any manual mode keys can you point me at them >> please? >> 73 Roger >> >> >> _______________________________________________ >> fldigi-alpha mailing list >> [email protected] >> https://lists.berlios.de/mailman/listinfo/fldigi-alpha >> > >
_______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
