ke4lkq wrote:
Please read the following, it works for me.
1) Tune your radio USB to 1.9 KHz below listed freq
Yes, please see this code excerpt:
wefax/wefax.cxx: m_carrier = 1900 ;
http://f6its.over-blog.com/pages/Frequences_meteo_FAX_et_teletype_RTTY-780785.html
"Do not forget to set the receiver frequency 1.9 KHz lower than the
value in the table, mode=USB ."
3) Narrow bandwidth on receiver if you can
By the way, it is now easy to add new FIR filters, Any idea welcome.
4) There is a separate FAX reception window, see menu
Or please type "Alt-V W"
On 6/7/2010 5:38 PM, Jim Haynes wrote:
I just tried it on the station on 12789.9 published frequency by
setting my receiver frequency to 12788.0 USB.
On the other hand, it seems that Jim already did that. Maybe it is
necessary to adjust the power threshold ?
I could receive a little fax, but it kept dropping to the "skip
phasing" and "skip APT" buttons. To get it to receive continuously
I had to mistune to 12787.9 or 12788.1
If it helps, you can switch to "Manual mode" to let the prog load the
image without interruption.
Am I correct that the mouse cursor is meaningingless in wefax mode?
Could it be made to disappear?
Right, someone already asked for that. I do not know exactly what should
ideally be done. Has someone an idea please ?
Cheers
Remi
_______________________________________________
fldigi-alpha mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/fldigi-alpha
