Are both versions sharing the same configuration files? That may be a problem. Unless you have set up the Alpha version per instructions Dave supplied some time ago to isolate it from your main application you may be introducing variables you aren't able to trace easily.
Just my first thoughts. Thanks Mike On Mar 8, 2011 1:37 PM, "Dick" <[email protected]> wrote: > > On Mar 8, 2011, at 10:04 AM, Dave Freese wrote: > >> On 3/7/11 9:22 PM, Dick wrote: >>> Dave, >>> >>> QSL note about the new fldigi-3.22.0AA and while I am not a NBEMS user >>> I installed fldgi to check on how it does commanding the TS-590S VFO's. >>> >>> I was surprised to find fldigi-3.22.0AA would command VFO-A only, like >>> the released 3.21.4. It was a short lived success. I then opened 3.21.4 >>> and confirmed as expected the QSY button only commanded when VFO-A >>> was active. I then changed back to 3.22.0AA and (like 3.21.4AA) it >>> commanded VFO-B and would not command VFO-A. >>> >>> Something is getting flipped by the alpha code. Just another clue to the >>> puzzle on how to get fldigi to command the active VFO on the TS-590S. >>> >>> Dick >> The rigCat interface code in 3.22.0AA and 3.21.4 are IDENTICAL Dick. I do not have a clue as to why your system is behaving the way it is. I've put out a call for some other TS590S testers to see if this behavior is specific to your setup. >> >> >> Dave > > I do not think the flipping of the VFO's has anything to do with RigCAT or > HamLib. It seems to be an fldigi issue between fldigi-3.21.4 and fldigi-3.22.0AA. > I just tired it again and fldigi-3.21.4 commands the TS-590S VFO-A, but does > not communicate at all with VFO-B. > > I quit fldigi-3.21.4 and launched 3.22.0AA with VF0-A still active on the > Kenwood display and there was no communications with VFO-A. The QSY > button changes fldigi on the waterfall, but does not change the TS-590S. > I then depressed the A/B button on the TS-570S to make VFO-B active and > fldigi-3.22.0AA commands the rig and the QSY button functions normal as > long as VF0-B is active. > > I am posting this response to the alpha list to see if this weirdness shows > up in other setups. I cannot explain the flipping of VFO's between two > versions of fldigi. > > The inability of fldigi to detect and command the active VFO is a limitation > to fldigi/Kenwood TS-590S users. Hopefully, this shortfall can be corrected > in the future. > > 73 Dick AA5VU > > > _______________________________________________ > fldigi-alpha mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/fldigi-alpha
_______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
