--- In [email protected], "Tracy Spratt" <tspr...@...> wrote: > > If you don't want to set up a full blown communication manager, you could do > this: > > 1) dispatch a *bubbling* event from your source module > > 2) Set up a listener at the main application on "this" > (this.addEventListener.) > > 3) Have the handler for that listener re-dispatch the event > > 4) In your target module, set a listener on > Application.application.addEventListener > > > > However, setting up a singleton data model would be almost as simple. > > > > Tracy > > > > _____ > > From: [email protected] [mailto:[email protected]] On > Behalf Of thelordsince1984 > Sent: Tuesday, March 03, 2009 10:53 AM > To: [email protected] > Subject: [flexcoders] Re: Modules Communication > > > > --- In flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com, > Simon Bailey <simon@> wrote: > > > > On the tip for communicating between modules using a framework, > > PureMVC has a utility called Pipes which helps you accomplish this: > > > > http://trac. <http://trac.puremvc.org/Utility_AS3_MultiCore_Pipes> > puremvc.org/Utility_AS3_MultiCore_Pipes > > > > ;S > > > > On 3 Mar 2009, at 10:10, claudiu ursica wrote: > > > > > > > > You should probably have ca comunication manager something like a > > > central event dispatcher (I believe the Mate framework already does > > > this but i might be mistaking) and register panels within that > > > scope. so when a panel fires an event the other listening panels > > > check if the event is adressed to them and actually consume catch > > > that event... > > > > > > there was some guy doing a prof of concept for this google for ALON > > > desing pattern ... > > > > > > HTH, > > > Claudiu > > > > > > From: thelordsince1984 <loreboa@> > > > To: flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com > > > Sent: Tuesday, March 3, 2009 10:53:49 AM > > > Subject: [flexcoders] Re: Modules Communication > > > > > > --- In flexcod...@yahoogro ups.com, Guy Morton <guy@> wrote: > > > > > > > > Have you read the section "Using interfaces for module > > > communication" > > > > in the docs? That's been working for me. > > > > > > > > > > thanks for the reply.. > > > > > > For Guy Morton... > > > > > > i've read it but modules are created at runtime so i would have a > > > maneger that controls communication over modules.is it true? > > > > > > For Alex Harui > > > > > > how can i achieve the commuication between modules..for example a > > > module dispatch an event...the event is catch by a manager and then > > > fires to the rigth destination. ..rember that i have an > > > application. ..it contains panels and each panel could contain a > > > module... > > > > > > thanks again > > > > > > Regards Lorenzo > > > > > > > > > > > > > > > > > > thanks all, > > but is there a simple manner to achieve module to module communication? > > suppose this scenario: > > i've a module within a panel. it contains a textinput...it fires a > custom event when the user clicks a button..the event contains an id > number..an other modules is listen for this event, catchs it at then > update itself depending on passed id... > > thanks again > Regards Lorenzo > Hi Tracy,
you said "However, setting up a singleton data model would be almost as simple" how can achieve this communication whith this suggestion? Can you post me a guide line to rich module to module communication with a single data module? thanks again, Regards Lorenzo
