I'm not sure, maybe since modules are independent swf's, but that is way
more complicated than necessary.
Look into the singleton data model. In such a case, you would do:
1. in the source module, MyModel.getInstance().id = myTextInput.text;
2. In the target module, text={ MyModel.getInstance().id }
3. Or use a changeWatcher if you need to take programmatic action when
"id" changes
Tracy
_____
From: [email protected] [mailto:[email protected]] On
Behalf Of thelordsince1984
Sent: Tuesday, March 03, 2009 12:30 PM
To: [email protected]
Subject: [flexcoders] Re: Modules Communication
--- In flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com,
"thelordsince1984" <lore...@...> wrote:
>
> --- In flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com,
Simon Bailey <simon@> wrote:
> >
> > On the tip for communicating between modules using a framework,
> > PureMVC has a utility called Pipes which helps you accomplish this:
> >
> > http://trac. <http://trac.puremvc.org/Utility_AS3_MultiCore_Pipes>
puremvc.org/Utility_AS3_MultiCore_Pipes
> >
> > ;S
> >
> > On 3 Mar 2009, at 10:10, claudiu ursica wrote:
> >
> > >
> > > You should probably have ca comunication manager something like a
> > > central event dispatcher (I believe the Mate framework already
does
> > > this but i might be mistaking) and register panels within that
> > > scope. so when a panel fires an event the other listening panels
> > > check if the event is adressed to them and actually consume catch
> > > that event...
> > >
> > > there was some guy doing a prof of concept for this google for
ALON
> > > desing pattern ...
> > >
> > > HTH,
> > > Claudiu
> > >
> > > From: thelordsince1984 <loreboa@>
> > > To: flexcod...@yahoogro <mailto:flexcoders%40yahoogroups.com> ups.com
> > > Sent: Tuesday, March 3, 2009 10:53:49 AM
> > > Subject: [flexcoders] Re: Modules Communication
> > >
> > > --- In flexcod...@yahoogro ups.com, Guy Morton <guy@> wrote:
> > > >
> > > > Have you read the section "Using interfaces for module
> > > communication"
> > > > in the docs? That's been working for me.
> > > >
> > >
> > > thanks for the reply..
> > >
> > > For Guy Morton...
> > >
> > > i've read it but modules are created at runtime so i would have a
> > > maneger that controls communication over modules.is it true?
> > >
> > > For Alex Harui
> > >
> > > how can i achieve the commuication between modules..for example a
> > > module dispatch an event...the event is catch by a manager and then
> > > fires to the rigth destination. ..rember that i have an
> > > application. ..it contains panels and each panel could contain a
> > > module...
> > >
> > > thanks again
> > >
> > > Regards Lorenzo
> > >
> > >
> > >
> > >
> > >
> >
> thanks all,
>
> but is there a simple manner to achieve module to module communication?
>
> suppose this scenario:
>
> i've a module within a panel. it contains a textinput...it fires a
> custom event when the user clicks a button..the event contains an id
> number..an other modules is listen for this event, catchs it at then
> update itself depending on passed id...
>
> thanks again
> Regards Lorenzo
>
is it possible to use localconnection among modules or is a bad way to
achieve module to module communication?
