Mark me supporting on this one... Cheers, Thomas
João Fernandes wrote: > > > Damon, > > but there isn't much information if you want to use RPC + FDS. All > examples are RPC or FDS only, not the mix. > > If you define your CF RPC destination inside FDS it won't work and there > isn't any example, best-practice or a technote how to implement this > correcly. > > If you merge FDS+CF this works fine. If Adobe could publish any > additional documentation how to achieve this (RPC+FDS), I think everyone > would be grateful. > > João Fernandes > > -----Original Message----- > From: flexcoders@yahoogroups.com <mailto:flexcoders%40yahoogroups.com> > on behalf of dcooper2025 > Sent: Wed 19-Jul-06 6:38 PM > To: flexcoders@yahoogroups.com <mailto:flexcoders%40yahoogroups.com> > Subject: [flexcoders] Re: Flex and CF > > People seem to think they need to jam FDS into the CF instance to > get them to work together for some reason, likely because that's the > main config setup with CF + Flex 1.5, but that's not necessary at > all any longer with Flex 2 FDS. > > With Flex 2 and FDS, you absolutely do not need FDS installed into > the CF app instance for things to work. We designed them to live > together on the same machine or seperately on different > machines/instances, but we didn't spend much time on the case where > people would try to get FDS inserted into the CF instance itself. I > suppose there are valid arguments for wanting to do this, but with > the RMI interface between the two now with Flex 2, and the existing > Flex 1.5 bits already living in the CF7 instance for CF7 Flash > Forms, etc (and the potential for conflict between Flex 1.5 and Flex > 2 bits in package names, etc, etc), we thought it best to recommend > the use case where CF and Flex 2 FDS are not living in the same > webapp instance. > > Hopefully that makes sense. > > Damon > > > --- In flexcoders@yahoogroups.com <mailto:flexcoders%40yahoogroups.com>, > "Jim" <[EMAIL PROTECTED]> wrote: > > > > Damon, > > > > When you say, "They live nicely side-by-side," how is Coldfusion > > loaded? Built-in Web Server, Multiserver (JRUN4), Using IIS or > Apache? > > Do they work side-by-side if CF is loaded with JRUN and FDS is > loaded > > with JRUN too, on the same machine? > > > > Coldfusion developers everywhere are having issues getting FDS > Express > > to work with CF. Sure we can update CF to 7.0.2. We can even > install > > FDS. That's easy. But logic identifies one similarity between CF > and > > FDS...ah, they both use JRun. So logic says, they should be able to > > use the same JRun installation; have one single JRun folder. Is > that > > not the case? (I've seen the technote that has us combining web.xml > > files, coping over other files to the lib folder, etc...but that > > technote is bogus.) > > > > Thanks, > > > > Jim Pickering > > --- In flexcoders@yahoogroups.com > <mailto:flexcoders%40yahoogroups.com>, "dcooper2025" <dcooper@> wrote: > > > > > > Specifically, you can just install Flex Enterprise Services on a > > > J2EE server on the same machine as CF, configure everything and > > > you're good to go. They live very nicely side-by-side. > > > > > > FYI, we've made the CF 7.0.2 doc for CF/Flex 2 integration > available > > > online where you can quickly reference it as needed" > > > > > > http://www.adobe.com/go/cfmx702docs > <http://www.adobe.com/go/cfmx702docs> > > > > > > and the ColdFusion 7.0.2 install instructions are here: > > > > > > http://www.adobe.com/go/flex2_cf_installation > <http://www.adobe.com/go/flex2_cf_installation> > > > > > > HTH > > > > > > Damon > > > > > > --- In flexcoders@yahoogroups.com > <mailto:flexcoders%40yahoogroups.com>, "Brian Holmes" <bholme@> > wrote: > > > > > > > > Hi everyone, > > > > Can anyone point me in the right direction of getting CF and > FDS > > > up on > > > > the same server, as it would be on production server. A > deployment > > > guide > > > > or old thread would be nice. Specifically I'm trying to load > flex > > > > applications and widgets in our already established CF > framewok. > > > > > > > > > > > > Thanks, > > > > Brian > > > > > > > > > > > > *** > > > > The information in this e-mail is confidential and intended > solely > > > for the individual or entity to whom it is addressed. If you > have > > > received this e-mail in error, please notify the sender by > return e- > > > mail, delete this e-mail, and refrain from any disclosure or > action > > > based on the information. > > > > *** > > > > > > > > > > > -- ------------------------------------ Thomas Rühl Design, Programming & Concepts akitogo OHG Hanauer Landstrasse 188 60314 Frankfurt Telefon +49 (0) 69 800 69 445 Fax +49 (0) 69 800 69 449 Mobil +49 (0) 179 750 75 87 E-Mail [EMAIL PROTECTED] Web http://www.akitogo.com ------------------------------------ ------------------------ Yahoo! Groups Sponsor --------------------~--> Great things are happening at Yahoo! Groups. See the new email design. http://us.click.yahoo.com/TISQkA/hOaOAA/yQLSAA/nhFolB/TM --------------------------------------------------------------------~-> -- Flexcoders Mailing List FAQ: http://groups.yahoo.com/group/flexcoders/files/flexcodersFAQ.txt Search Archives: http://www.mail-archive.com/flexcoders%40yahoogroups.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/flexcoders/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/