Art, I still have the problem with SVN #3520. What conditions did you test with? VFO freq? Mode? Filter edges? Etc.?
73, Ray, K9DUR http://k9dur.info From: [email protected] [mailto:[email protected]] Sent: Friday, February 05, 2010 1:19 PM To: K9DUR; Flex-Edge E-Mail Reflector Subject: Re: [FlexEdge] Close to Band Edge TX Bug - SVN #3529 Mine still works correctly. SVN 3530. F5k Art, K8JK ________________________________________ From: K9DUR <[email protected]> To: Flex-Edge E-Mail Reflector <[email protected]> Sent: Fri, February 5, 2010 12:55:51 PM Subject: [FlexEdge] Close to Band Edge TX Bug - SVN #3529 The fix to allow operation close to the band edge apparently is no longer working correctly. Running PB-PAL SVN #3529 under Vista Home Premium (32-bit) Situation: Mode: RTTY (DIGL) VFO: 10.150000 MHz TX Filter: -2460 to -1960 Try to transmit & everything works as expected. Change VFO frequency to 10.150001 MHz. Try to transmit & you get the following result: 1. The text below the VFO readout says "Out of Band" in green letters. 2. The radio goes into transmit mode & appears to send the message. 3. The panadapter properly displays the "transmitted" signal. 4. There is no power output. You do not get the warning box saying your filter settings plus the VFO frequency are out of the band. That only appears if you raise the VFO frequency up until the bandpass of the filter extends above 10.150 MHz. This used to work correctly. Speculation: Could this be an unintended consequence of adding ALC to the digital modes? Does anyone else see this behavior? If so, I will enter a bug report. 73, Ray, K9DUR http://k9dur.info _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
