There were changes to the firmware that coincided with the changes in PowerSDR. What firmware revision are you using?
Eric On Fri, Feb 5, 2010 at 12:33 PM, K9DUR <[email protected]> wrote: > Art, > > I still have the problem with SVN #3520. What conditions did you test > with? > VFO freq? Mode? Filter edges? Etc.? > > 73, Ray, K9DUR > http://k9dur.info > > From: [email protected] [mailto:[email protected]] > Sent: Friday, February 05, 2010 1:19 PM > To: K9DUR; Flex-Edge E-Mail Reflector > Subject: Re: [FlexEdge] Close to Band Edge TX Bug - SVN #3529 > > Mine still works correctly. SVN 3530. F5k > > Art, K8JK > > ________________________________________ > From: K9DUR <[email protected]> > To: Flex-Edge E-Mail Reflector <[email protected]> > Sent: Fri, February 5, 2010 12:55:51 PM > Subject: [FlexEdge] Close to Band Edge TX Bug - SVN #3529 > > The fix to allow operation close to the band edge apparently is no longer > working correctly. > > Running PB-PAL SVN #3529 under Vista Home Premium (32-bit) > > Situation: > > Mode: RTTY (DIGL) > VFO: 10.150000 MHz > TX Filter: -2460 to -1960 > > Try to transmit & everything works as expected. > > Change VFO frequency to 10.150001 MHz. Try to transmit & you get the > following result: > > 1. The text below the VFO readout says "Out of Band" in green letters. > 2. The radio goes into transmit mode & appears to send the message. > 3. The panadapter properly displays the "transmitted" signal. > 4. There is no power output. > > You do not get the warning box saying your filter settings plus the VFO > frequency are out of the band. That only appears if you raise the VFO > frequency up until the bandpass of the filter extends above 10.150 MHz. > > This used to work correctly. Speculation: Could this be an unintended > consequence of adding ALC to the digital modes? > > Does anyone else see this behavior? If so, I will enter a bug report. > > 73, Ray, K9DUR > http://k9dur.info > > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
