Art, That is not the same situation. Your VFO frequency is inside the band. That works ok here also.
The issue arises from trying to run RTTY near the top end of 30m. If you are in DIGL mode (which is normal for RTTY), the TX tones are about 2.2 kHz below the VFO frequency. If you want to transmit within the top 2 kHz of the band, your VFO must be set above 10.150 MHz, which is outside the band. Last November, Eric made some modifications to PowerSDR & to the firmware to allow this situation. The software should now allow transmit based on the VFO setting plus the TX filter frequency range, even if the VFO frequency is outside the band. 73, Ray, K9DUR http://k9dur.info _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
