Running F5K 192k 1024 buffer, normal mode Windows 7 32 bit on lenova T400 4gb ram dual core PowerSDR SVN3644 Firmware 2.0.2.2 Firewire driver 3.5.2.8028 Pal version 3.5.2.8028
noticed this after updating from SVN3642 and replacing the pal.dll that Tim pointed to in the flex download area however that may be just a coincidence. I also noticed that setting the sample rate and buffer size in the firewre driver dialog does not transfer to PowerSDR settings or vice-versa - was this a feature in the past? Also - no power out when I hit tune (zero forward power). Did a database reset with same results. Cycles power on the F5K and TX output is back. I've run just about every PowerSDR 2.0 alpha SVN (update daily) without any issues until this morning after fetching the latest from the SVN server and replacing the pal.dll (did these at the same time). Things seem stable for the moment so will continue running these latest bits and will report if I get a repro. I did run the RX image calibration (into dummy load) just after downloading 3644 (did database reset first) and noticed that the KB http://kc.flex-radio.com/KnowledgebaseArticle50140.aspx?Keywords=image+calibration recommends setting the firewire driver to safe mode 1 however a recent post here said that Win7 users should consider running normal mode - is that true for running the image calibration also? See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at PowerSDR.Console.chkPower_CheckedChanged(Object sender, EventArgs e) at System.EventHandler.Invoke(Object sender, EventArgs e) at System.Windows.Forms.CheckBox.OnCheckedChanged(EventArgs e) at System.Windows.Forms.CheckBox.set_CheckState(CheckState value) at System.Windows.Forms.CheckBox.OnClick(EventArgs e) at System.Windows.Forms.CheckBox.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- PowerSDR Assembly Version: 1.19.3.0 Win32 Version: 1.19.3.0 CodeBase: file:///C:/data/ham/PowerSDRSVN/Release/PowerSDR.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Data Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Interop.TDxInput Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///C:/data/ham/PowerSDRSVN/Release/Interop.TDxInput.DLL ---------------------------------------- Accessibility Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900) CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. -- 73's N7BCP _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
