When I do this test the DPC Latency jumps to "Max Latency 4499 us" and stays there. The raspiness continues even after I shut down Googe Earth. I have to click "Start" 2x to clear it up.
Previous versions didn't have this issue. I used Google Earth and Flex all the time until just the other day. On Sat, Apr 24, 2010 at 5:23 PM, Tim Ellison <[email protected]> wrote: > Drax. > > Do this test. Load DPCLAT and while running it, open Google Earth and see > if there is a correlation between observing a few DPC "spikes" and then the > raspy audio. IF you see this, what was the DPC latency of the spikes? > > > -Tim > > > -----Original Message----- > From: [email protected] [mailto: > [email protected]] On Behalf Of Drax Felton > Sent: Saturday, April 24, 2010 5:21 PM > To: [email protected] > Subject: Re: [FlexEdge] PowerSDR 3644 Raspy audio > > > I have the same issue with this version. I was listening to ten meters, > loaded Google Earth, it got raspy, I closed Google Earth and it stayed > raspy > until I Re-started PowerSDR using its Start button. > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Larry da Ponte > Sent: Saturday, April 24, 2010 4:17 PM > To: [email protected] > Subject: Re: [FlexEdge] PowerSDR 3644 crash > > After leaving PowerSDR running for three hours it started to get the raspy > audio - clicking stop/start button on PowerSDR cleared up the RX audio. > Have not noticed this with the SVN 3642 and old pal.dll. > > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
