Drax. Do this test. Load DPCLAT and while running it, open Google Earth and see if there is a correlation between observing a few DPC "spikes" and then the raspy audio. IF you see this, what was the DPC latency of the spikes?
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Drax Felton Sent: Saturday, April 24, 2010 5:21 PM To: [email protected] Subject: Re: [FlexEdge] PowerSDR 3644 Raspy audio I have the same issue with this version. I was listening to ten meters, loaded Google Earth, it got raspy, I closed Google Earth and it stayed raspy until I Re-started PowerSDR using its Start button. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Larry da Ponte Sent: Saturday, April 24, 2010 4:17 PM To: [email protected] Subject: Re: [FlexEdge] PowerSDR 3644 crash After leaving PowerSDR running for three hours it started to get the raspy audio - clicking stop/start button on PowerSDR cleared up the RX audio. Have not noticed this with the SVN 3642 and old pal.dll. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
