Yes, it is. But it is well hidden :-)
And if found, I recommend that you do not try any run it without
instructions. You do not want to have to send your FLEX-1500 back to
FlexRadio Systems to have it flash reloaded.
Here is the catch 22. We do not have a published procedure for doing
the FLEX-1500 firmware update since the firmware updater was in a state
of flux from a development standpoint.
I'll get a KB article put together later today/tomorrow to instruct
users how to update their firmware for the FLEX-1500.
-Tim
---
W4TME
FlexRadio Systems Internet Systems Admin.
Product Verification Team
"Tune in Excitement"
On 7/23/2010 4:01 PM, David McKenzie wrote:
The release notes mention a firmware update for the Flex-1500. Is that
included with the installer?
On Fri, Jul 23, 2010 at 3:20 PM, Tim Ellison<[email protected]> wrote:
The Firewire driver is automatically loaded with the integrated installer
when run in complete mode. If you need a firmware update, PowerSDR 2.x will
tell you so and that firmware binary will be on your PC as a consequence of
installing PowerSDR v2.0.6 Beta
http://kc.flex-radio.com/KnowledgebaseArticle50441.aspx
-Tim
-----Original Message-----
From: [email protected] [mailto:
[email protected]] On Behalf Of Ari Thor
Sent: Friday, July 23, 2010 3:14 PM
To: 'dan edwards'; 'flexedge'; 'N5ACStephen Hicks'
Subject: Re: [FlexEdge] PowerSDR 2.0.6 Beta Release
Hi
What Firmware should I run with 2.0.6 and what firewire driver ?
Ari
-----Original Message-----
From: [email protected] [mailto:
[email protected]] On Behalf Of dan edwards
Sent: 23. júlí 2010 13:06
To: flexedge; N5ACStephen Hicks
Subject: Re: [FlexEdge] PowerSDR 2.0.6 Beta Release
uh oh...trouble in paradise...F3K...cwx...canned ' cq '....sidetone is
T-7... on air signal also T-7....i sound like a cuban....no matter what
audio buffers i try...
73, w5xz, dan
--- On Fri, 7/23/10, Stephen Hicks, N5AC<[email protected]> wrote:
From: Stephen Hicks, N5AC<[email protected]>
Subject: [FlexEdge] PowerSDR 2.0.6 Beta Release
To: "flexedge"<[email protected]>
Date: Friday, July 23, 2010, 3:43 AM
PowerSDR 2.0.6 Beta has been released and is on the FlexRadio website
(details below). The release notes show what we fixed in going from 2.0.5
to 2.0.6 as well as some known issues we discovered in testing. Please
note
that this release has a VAC problem for transmit so if you are using VAC,
you will want to avoid this release. Having said this, we would appreciate
feedback on 2.0.6. We are likely to release a new Beta drop about every
few
weeks from this point forward until we feel we have a release that fixes
all
major issues that have been encountered in 2.0. Your feedback will ensure
that we focus on the right things, so please enter bug reports on the
FlexRadio support page (bug tracker) if you encounter any issues that have
not already been found (mentioned in the release notes or if you search in
the bug tracker). This is only being announced on the FlexEdge reflector
and remember, this is Beta software so you may encounter issues that we
have
not seen yet.
Here is where 2.0.6 can be found:
PowerSDR v2.0.6 Suite Beta Software (integrated Installer)
*http://support.flex-radio.com/Downloads.aspx?id=338
*PowerSDR v2.0.6 Suite Beta Software Release Notes
*http://support.flex-radio.com/Downloads.aspx?id=339
*
Steve
Stephen Hicks, N5AC, AAR6AM
VP Engineering
FlexRadio Systems™
13091 Pond Springs Road, #250
Austin, TX 78729
Phone: 512-535-4713 x205
Email: [email protected]
Web: www.flex-radio.com
*Tune In Excitement™*
PowerSDR™ is a trademark of FlexRadio Systems
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
Open this link and play the video
www.inspiredbyiceland.is/iceland-video
****************************************
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used
for posting topics related to SDR software development and experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
