Clay, Cycle the power of the 1500 then bring up PowerSDR.
73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: [email protected] <[email protected]> Web: www.flexradio.com <http://www.flex-radio.com> "Tune in excitement!" ™ On Fri, Nov 12, 2010 at 7:47 PM, Clay W7CE <[email protected]> wrote: > Just for fun, I moved the 1500 to a different USB port. I get the message > that my device has been successfully installed, but PowerSDR still doesn't > seem to have a connection to the I/Q data. It does know the S/N and > Firmware info (in the Setup dialog), so there is some communication > happening. > > 73, > Clay W7CE > > > On 11/12/2010 5:42 PM, Clay W7CE wrote: > >> The subject says most of it. Version 2.0.16 is working fine for the 3000 >> and the 5000A. I turned off the Firewire devices, connected the 1500 up to >> a USB port and restarted PowerSDR. The chooser listed the 1500 and I chose >> it. It then asked to upgrade the firmware to 0.5.0.1 and I said yes. I >> power cycled the radio as requested and PowerSDR started up. When I push >> start the panadapter is blank and the S-Meter reads -271 dBm. I shut >> everything down, rebooted Win7 and tried again. PowerSDR again asked me to >> select a radio and I chose the 1500. When I push start, everything remains >> flatline. >> >> The 1500 works fine on my laptop with 2.0.8, although I haven't tried >> since the firmware update. I never could get it to work on my Win7 machine >> with 2.0.8. At Tim's suggestion, I decided to wait for this release. What >> do I try next? I'd really like to have both the 5000A and 1500 running at >> the same time on this machine. >> >> 73, >> Clay W7CE >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software development and >> experimentalist who are using beta versions of the software. >> >> > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
