I cannot reproduce that behavior. I set PTT out in the Antenna form to enable, change bands and it stays persistent.
Did you start with a new database (no data imports). -Tim From: Richard Saue [mailto:[email protected]] Sent: Friday, February 18, 2011 6:00 PM To: Tim Ellison Cc: [email protected] Subject: Re: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release Candidate I have tried both, but It does not matter. The setting goes away as soon as I change band, e.g : I enable PTT in simple mode on 30 meters; change band to 20 meter; the setting goes away; change band back to 30 meters, and the setting is still gone. I have also tried to edit the databasefile: <HIDAnt> <Key>chkPTTOutEnable</Key> <Value>True</Value> </HIDAnt> When I start PowerSDR the PTT setting is enabled. This seting does, however, also go away as soon as I change band. 73 de LA4SGA Richard 2011/2/18 Tim Ellison <[email protected]<mailto:[email protected]>> Are you using the Expert Setting in the Antenna Form? If so you have to set it for each band. -Tim -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Richard Saue Sent: Friday, February 18, 2011 5:41 PM To: [email protected]<mailto:[email protected]> Subject: Re: [FlexEdge] Announcing PowerSDR(TM) v2.0.19 RC1 Release Candidate Hi, the new version seems like an improvement on cw. Using a Flex-1500 I do now have problems enabling PTT Out on flexwire for a 100w PA. I can enable PTT in the Antenna Section, and it works. But as soon as I change band, the setting goes away. This was no problem using v2.0.16. Am I the only one with this problem? 73 de LA4SGA Richard 2011/2/18 Gerald Youngblood <[email protected]<mailto:[email protected]>> > Dear FlexRadio customers: > > > FlexRadio is pleased to announce the availability of PowerSDR v2.0.19 > Release Candidate 1 (RC1) for public download from our website. This > version incorporates a totally new CW keying architecture that was > written from the ground up to achieve minimum jitter and latency using > both internal > and external keyers. To say this is a rewrite is a bit of an > understatement. We got out Farnsworth and started from "dit." > Everything is right now in "PARIS." > > > We have also done significant work since the v2.0.16 beta release to > improve installation and overall out of box experience on all radios. > We have optimized the USB driver for the FLEX-1500 to perform well on > a wide range of PC platforms. We have also incorporated a new > FireWire driver with less CPU overhead on Windows 7 systems. The > number of little and not so little bug fixes are too numerous to > mention here. Check out the change log and release notes. A note > about release notes, PLEASE READ the them to get the most from your > FlexRadio. > > > The URL for the release notes is: > > http://support.flex-radio.com/Downloads.aspx?id=359 > > > > The URL for the installer software is: > > http://support.flex-radio.com/Downloads.aspx?id=358 > > > > We are very excited about v2.0.19 RC1 as we enter the final steps > toward the PowerSDR v2.0.x Official Release. We thank you for your > patience and support while we have been preparing this important > release. We request you report any bugs found in this release to the > bug tracker at http://support.flexradio.com/BugList.aspx?it=b. Be > sure to note 2.0.19 > RC1 > in the Software Product Version field as we will be focusing our > attention on those specific reports. > > > > We would like to say a special thanks to our beta team for their > tireless support in testing a number of interim releases to get here. > > > We are taking the weekend off but 2.1 starts on Monday. In the > software world it is never finished. > > > Warmest 73s, > > > Gerald > > > Gerald Youngblood, K5SDR > President and CEO > FlexRadio Systems(TM) > 13091 Pond Springs Road, #250 > Austin, TX 78729 > Phone: 512-535-4713 Ext. 202 > Email: [email protected]<mailto:[email protected]> > Web: www.flexradio.com<http://www.flexradio.com> <http://www.flex-radio.com/> > > Tune In Excitement (TM) > > PowerSDR(TM) is a trademark of FlexRadio Systems > _______________________________________________ > Flexedge mailing list > [email protected]<mailto:[email protected]> > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected]<mailto:[email protected]> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
