Bill, I may have missed what you are asking, but using v2.0.19 this is how I record myself:
1. Turn Drive (power out) to 0. 2. Bring up Wave File Controls, click on Record and key-up the rig (or push MOX). 3. To play back, turn MON on. 4. In the Wave File Controls panel, select ADD to add the file you just recorded, hight-lite that file, select Play and key-up the rig. 73, Joe N9VX ---------------------------------------------------------------------------------------------------------- Bill K7UOP Fri, 25 Feb 2011 11:07:14 -0800 I tried recording and then playing back a wav file using the Wave File Controls form, and also from the main console buttons in the upper left corner. When I select Play of a post processed audio recording, it plays in the center (actually + and - of center) of the Panadapter display. And then all on the air signals are reflected symmetrically on both sides of center. If I then change Sample Rate in the PowerSDR Setup form Audio, Primary tab the Panadapter goes back to normal. I can play back the post processed wave file in another program and it is good audio. Playing back a pre-processed I/Q works Ok without the problem. I've done a fair amount of playing with I/Q recordings but not post-processed audio files. So don't know what to really expect. Anyone else have this problem or is it just my setup? 73, Bill - K7UOP _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
